32-bit GTL terminator with octal enables

DESCRIPTION The GTL202x series are 32-bit bus switches with GTL termination and octal output enables. The GTL202x is intended to provide GTL bus termination in multi-processor environments. The enable pins allow the system control to disconnect the bus termination. When the bus switch is enabled

N-Channel, 20V, 0.89A, Small Signal MOSFET

Features z Trench Technology z Supper high density cell design z Excellent ON resistance z Extremely Low Threshold Voltage z Small package SOT-23/323 Applications z DC-DC converter circuit z Small Signal Switch z Load Switch z Level Shift

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

8 Series Pushbutton Switches

■Features 1. Contacts Silver or gold-plated contacts. 2. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between terminal and ground: 4 mm minimum. 5. Prevention of flux entry The epoxy resin seal on bottom of the switch

TOKEN RING MAGNETICS

文件：99.66 Kbytes Page：2 Pages

Snap Bushings

文件：133.28 Kbytes Page：1 Pages