Chip Monolithic Ceramic Capacitors

Chip Monolithic Ceramic Capacitors For General Purpose GRM Series ■ Features 1. Higher resistance of solder-leaching due to the Ni-barriered termination, applicable for reflow-soldering, and flow-soldering (GRM18/21/31 type only). 2. The GRM series is a lead free product. 3. Small

Chip Monolithic Ceramic Capacitors

文件：204.23 Kbytes Page：13 Pages

for Flow/Reflow Soldering GRM15/18/21/31 Series

文件：204.23 Kbytes Page：13 Pages

Chip Monolithic Ceramic Capacitors

文件：204.23 Kbytes Page：13 Pages

Chip Monolithic Ceramic Capacitors for Flow/Reflow Soldering GRM15/18/21/31 Series

文件：204.23 Kbytes Page：13 Pages

High Dielectric Constant Type 6.3/16/25/50V

文件：223.27 Kbytes Page：13 Pages

GRM21B5C2J222FWAA#

Applications Unsuitable Applications Please be sure to read and comply with these Precautions for use. Specific Applications Consumer equipment,Industrial Equipment,Mobile Electronics,Medical equipment [GHTF A/B/C] except for implant equipment,Automotive infotainment/comfort equipment Please r

GRM21B5C2J222FWAA#

Applications Unsuitable Applications Please be sure to read and comply with these Precautions for use. Specific Applications Consumer equipment,Industrial Equipment,Mobile Electronics,Medical equipment [GHTF A/B/C] except for implant equipment,Automotive infotainment/comfort equipment Please r

Ceramic Capacitors(SMD)

Specifications 180mm Paper Tape 330mm Paper Tape

Ceramic Capacitors(SMD)

Specifications 180mm Paper Tape 330mm Paper Tape

Ceramic Capacitors(SMD)

Specifications 180mm Paper Tape 330mm Paper Tape

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

SKY67177-11: 2.3 to 5 GHz High Gain, Low Noise Amplifier with Bypass

Applications • 4G LTE and 5G NR base stations • Massive MIMO active antenna array • Receive LNA for micro-cell, macro-cell and massive MIMO base stations • Land mobile radios and military communications Features • Gain 34 dB @ 3.8 GHz • Low noise figure 0.6 dB @ 3.8 GHz • High IP3 perform

null3400–3600 MHz, 30 dB, 10.5 W Avg. AIRFAST POWER AMPLIFIER MODULE

Airfast Power Amplifier Module

Airfast Power Amplifier Module

Airfast Power Amplifier Module

3300-3670 MHz, 31 dB, 10.7 W Avg. AIRFAST POWER AMPLIFIER MODULE

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

Evaluation Board for the ADF5901, ADF5904, and ADF4159 Chipset for a 24 GHz FMCW Radar

FEATURES Evaluates the chipset containing the ADF5901 24 GHz Tx MMIC, the ADF5904 24 GHz Rx MMIC, the ADF4159 13 GHz PLL Accompanying software controls all functions from a PC GENERAL DESCRIPTION The EV-RADAR-MMIC2 evaluation board is designed to evaluate the performance of the ADF5901, a 24

50MHz TO 1000MHz, 15W GaN WIDEBAND

Product Description The RFHA1000 is a wideband Power Amplifier designed for CW and pulsed applications such as wireless infrastructure, RADAR, two way radios and general purpose amplification. Using an advanced high power density Gallium Nitride (GaN) semiconductor process, these high-performance

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

800mA 1.5MHz Synchronous Step-Down Converter

GENERAL DESCRIPTION The SP6669 is a synchronous current mode PWM step down (buck) converter capable of delivering up to 800mA of current and optimized for portable battery-operated applications. Based on a current-mode 1.5MHz constant frequency PWM control scheme, the SP6669 reduces the overall

3MHz Dual 1.5A Step-Down Converters and Dual Low-Input LDOs with I2C Compatible

3MHz Dual 1.5A Step-Down Converters and Dual Low-Input LDOs with I2C Compatible Interface The ISL9305H is an integrated mini Power Management IC (mini-PMIC) for powering low-voltage microprocessor, or applications using a single Li-Ion or Li-Polymer cell battery to power multiple voltage rails. I

3MHz Dual Step-Down Converters and Dual Low-Input LDOs

3MHz Dual Step-Down Converters and Dual Low-Input LDOs with I2C Compatible Interface The ISL9305 is an integrated mini Power Management IC (mini-PMIC) ideal for applications of powering low-voltage microprocessor or multiple voltage rails with battery as input sources, such as a single Li-ion or

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

850kHz 700mA Synchronous Buck DC/DC Converter

General Description The AAT1151 SwitchReg™ is a step-down switching converter ideal for applications where high efficiency is required over the full range of output load conditions. The 2.7V to 5.5V input voltage range makes the AAT1151 ideal for single-cell lithium-ion/polymer battery applicatio

2A, 24V, 1.2MHz Step-Down Converter

General Description The RT8271 is a high voltage buck converter that can support the input voltage range from 4.75V to 24V and the output current can be up to 2A. Current Mode operation provides fast transient response and eases loop stabilization. The RT8271 also provides adjustable soft start t

2A Step-Down Converter

General Description The AAT1153 SwitchReg™ is a 1.2MHz constant frequency current mode PWM step-down converter. It is ideal for portable equipment requiring very high current up to 2A from single-cell Lithium-ion batteries while still achieving over 90 efficiency during peak load conditions. The

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

850kHz 700mA Synchronous Buck DC/DC Converter

General Description The AAT1151 SwitchReg™ is a step-down switching converter ideal for applications where high efficiency is required over the full range of output load conditions. The 2.7V to 5.5V input voltage range makes the AAT1151 ideal for single-cell lithium-ion/polymer battery applicatio

System power IC

2. Features • AVCC input voltage range: 4.5V to 5.5V • DCDC converter (CH1 and CH2) Power voltage range Output voltage (*1) Output current CH1 3.6V to 5.5V 1.05V 2A CH2 4.3V to 5.5V 3.3V 2A 4.0V to 5.5V 3.3V 300mA  Synchronous Current Mode Buck Converters  Output current 2A and more

Ultra Low Quiescent Current, Hysteretic DC-DC Step-Up Converter

General Description The AS1310 is an ultra low IQ hysteretic step-up DC-DC converter optimized for light loads (60mA), where it achieves efficiencies of up to 92. Key Features Input voltage range: 0.7V to 3.6V Fixed output voltage range: 1.8V to 3.3V Output current: 60mA @ VIN=0.9

600mA Voltage-Scaling Step-Down Converter for RF Power Amplifiers with Bypass Switch

General Description The AAT1171 SwitchReg™ dynamically controls the operating voltage of a WCDMA or CDMA power amplifier inside single-cell, lithium-ion battery-powered systems. The AAT1171 outputs a voltage between 0.6V and 3.6V, thereby optimizing the amplifier efficiency at both low and high t

RS9116 n-Link™ and WiSeConnect™ Wi-Fi® and Dual-Mode Bluetooth® 5 Wireless Connectivity B00 Module Solution

1.1 Features Wi-Fi • Compliant to single-spatial stream IEEE 802.11 b/g/n with single band support • Support for 20 MHz channel bandwidth • Transmit power up to +18 dBm with integrated PA • Receive sensitivity as low as -96 dBm • Data Rates: 802.11b: Up to 11 Mbps; 802.11g: Up to 54 Mbps; 80

ADS78/8505EVM Users Guide

Features · Full-Featured Evaluation Board for the ADS7804, ADS7805 or ADS8505, parallel Analog to Digital Converters · Industry Standard ±10 V Analog Input Range · Built in reference · Parallel Interface with 3-state output drivers · Compatible with the 5-6K Interface Board for use with a va

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

System power IC

2. Features • AVCC input voltage range: 4.5V to 5.5V • DCDC converter (CH1 and CH2) Power voltage range Output voltage (*1) Output current CH1 3.6V to 5.5V 1.05V 2A CH2 4.3V to 5.5V 3.3V 2A 4.0V to 5.5V 3.3V 300mA  Synchronous Current Mode Buck Converters  Output current 2A and more

High Efficiency Serial LED Driver with 30V Integrated Switch

Description The FAN5330 is an LED driver that features fixed frequency mode operation and an integrated FET switch. This device is designed to operate at high switching frequencies in order to minimize switching noise measured at the battery terminal of hand-held communications equipment. Quiesce

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

600mA Voltage-Scaling Step-Down Converter for RF Power Amplifiers with Bypass Switch

General Description The AAT1171 SwitchReg™ dynamically controls the operating voltage of a WCDMA or CDMA power amplifier inside single-cell, lithium-ion battery-powered systems. The AAT1171 outputs a voltage between 0.6V and 3.6V, thereby optimizing the amplifier efficiency at both low and high t

3A, 6.5V, Ultra-Low Noise, Ultra-Low Dropout Linear Regulator

General Description The RTQ2539A is a high-current (3A), low-noise (6.8μVRMS), high accuracy (1 over line, load, and temperature), low-dropout linear regulator (LDO) capable of sourcing 3A with extremely low dropout (max. 180mV). The device supports single input supply voltage as low to 1.1V

High Voltage, 1.2 MHz/600 kHz, 800 mA

GENERAL DESCRIPTION The ADP2370/ADP2371 are high efficiency, low quiescent current, 800 mA buck (step-down) dc-to-dc converters in small 8-lead, 3 mm × 3 mm LFCSP (QFN) packages. The total solution requires only three tiny external components. FEATURES Input voltage range: 3.2 V to 15 V, ou

16-Bit General Purpose Microcontrollers with 256-Kbyte Flash and 16-Kbyte RAM in Low Pin Count Packages

Analog Features • Up to 14-Channel, Software Selectable, 10/12-Bit Analog-to-Digital Converter: - 12-bit, 200K samples/second conversion rate (single Sample-and-Hold) - Sleep mode operation - Charge pump for operating at lower AVDD - Band gap reference input feature - Windowed threshold co

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

Advanced Analog GreenPAK Evaluation Board

The evaluation board separates the key features of AA PAK into spatially grouped sections on the PCB. These features include the OpAmp, the rheostats, and the analog switches. The information below provides application ideas and lists the associated TP connections for each section. Note that ma

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

Ceramic Capacitors(SMD)

Specifications 180Embossed Tape 330Embossed Tape

16-Bit General Purpose Microcontrollers with 256-Kbyte Flash and 16-Kbyte RAM in Low Pin Count Packages

Analog Features • Up to 14-Channel, Software Selectable, 10/12-Bit Analog-to-Digital Converter: - 12-bit, 200K samples/second conversion rate (single Sample-and-Hold) - Sleep mode operation - Charge pump for operating at lower AVDD - Band gap reference input feature - Windowed threshold co

CHIP MONOLITHIC CERAMIC CAPACITOR

GRM series / Hi-Cap (1uF and over) Features 1. TA chip capacitor replacement product lineup is available in X7R (X7S, X7T, X7U), X6S(X6T) and X5R temperature characteristics with a capacitance of 1uF and larger. 2. The line of high volumetric capacitance ceramic chip capacitors is available in

Tiny I2C Programmable Linear Battery Charger

GENERAL DESCRIPTION The ADP5061 charger is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port. The ADP5061 operates from a 4 V to 6.7 V input voltage range but is tolerant o

18V Input, 4A, ACOT® Buck Converter with Both FETs OC Protection

General Description The RT6264A/B is a simple, easy-to-use, 4A synchronous step-down DC-DC converter with an input supply voltage range of 4.5V to 18V. The device possesses an accurate 0.765V reference voltage and integrates low RDS(ON) power MOSFETs to achieve high efficiency. The RT6264A/