Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low-Voltage SPST Analog Switch

FSA1156和FSA1157是高性能、单刀单掷(SPST)模拟开关。 该器件具有0.75Ω（典型值）的超低RON，并且可以在1.65V至5.5V的广泛VCC电压范围中操作。 此类器件采用次微米CMOS技术制造，实现了快速的开关速度。 该选择输入符合TTL电平要求。 FSA1156具有常开路操作；FSA1157具有常闭路操作。 • 25°C且电源电压为4.5V时，最大导通电阻(RON)为0.9Ω\n• 最大RON为0.3Ω平坦度（4.5V电源）\n• 宽VCC工作电压范围： 1.65V至5.5V\n• 快速导通和关断时间\n• 符合TTL要求的耐过压控制输入\n• 提供SC70和MicroPak™ 节省空间表面贴装\n• 采用无铅(Pb)MicroPak封装;

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low-RON, Low-Voltage SPST Analog Switch

Features Low On-resistance, Ron=1.5Q when A=5V « 1.8V Logic Compatible Control Pin AOverrides VCC to Achieve True Isolation Even When Supply Is Dead High Off-Isolation: -100dB @ 100KHz » Low Channel-to-Channel Crosstalk: -97dB @ 100KHz « High Bandwidth (-3dB @350MHz) Suitable

Low-Voltage SPST Analog Switch

文件：1.03392 Mbytes Page：13 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-Voltage SPST Analog Switch

文件：1.03392 Mbytes Page：13 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Speaker Drive Amplifier

GENERAL DESCRIPTION The MSC1157, designed specifically to operate at a low voltage with low current consumption, is a power amplifier developed for driving a speaker for a voice IC. The voltage gains can be adjusted over a range of up to ten. The differential output can directly drive a speaker

2000-2200 MHz. WCDMA Ultra Linear Power Amplifier

Features (typical values) Low Noise 1.0 dB. High IP3 45 dBm. High Gain 27 dB. Low Cost

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED PROCESSORS

DESCRIPTION The SC1157 is a low-cost, full featured, synchronous voltage-mode controller designed for use in single ended power supply applications where efficiency is of primary concern. Synchronous operation allows for the elimination of heat sinks in many applications. The SC1157 is ideal for

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED PROCESSORS

DESCRIPTION The SC1157 is a low-cost, full featured, synchronous voltage-mode controller designed for use in single ended power supply applications where efficiency is of primary concern. Synchronous operation allows for the elimination of heat sinks in many applications. The SC1157 is ideal for

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED PROCESSORS

DESCRIPTION The SC1157 is a low-cost, full featured, synchronous voltage-mode controller designed for use in single ended power supply applications where efficiency is of primary concern. Synchronous operation allows for the elimination of heat sinks in many applications. The SC1157 is ideal for