Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low-Voltage SPST Analog Switch

FSA1156和FSA1157是高性能、单刀单掷(SPST)模拟开关。 该器件具有0.75Ω（典型值）的超低RON，并且可以在1.65V至5.5V的广泛VCC电压范围中操作。 此类器件采用次微米CMOS技术制造，实现了快速的开关速度。 该选择输入符合TTL电平要求。 FSA1156具有常开路操作；FSA1157具有常闭路操作。 • 25°C且电源电压为4.5V时，最大导通电阻(RON)为0.9Ω\n• 最大RON为0.3Ω平坦度（4.5V电源）\n• 宽VCC工作电压范围： 1.65V至5.5V\n• 快速导通和关断时间\n• 符合TTL要求的耐过压控制输入\n• 提供SC70和MicroPak™ 节省空间表面贴装\n• 采用无铅(Pb)MicroPak封装;

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low-Voltage SPST Analog Switch

文件：1.03392 Mbytes Page：13 Pages

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low RON Low Voltage SPST Analog Switch

General Description The FSA1156 and FSA1157 are high performance Single Pole/Single Throw (SPST) analog switches. The devices feature ultra low RON of 0.75Ω (typical) and will operate over the wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve f

Low-RON, Low-Voltage SPST Analog Switch

Features Low On-resistance, Ron=1.5Q when A=5V « 1.8V Logic Compatible Control Pin AOverrides VCC to Achieve True Isolation Even When Supply Is Dead High Off-Isolation: -100dB @ 100KHz » Low Channel-to-Channel Crosstalk: -97dB @ 100KHz « High Bandwidth (-3dB @350MHz) Suitable

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-Voltage SPST Analog Switch

文件：1.03392 Mbytes Page：13 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

包装：管件 描述：IC SWITCH SPST 6MICROPAK 集成电路（IC） 模拟开关，多路复用器，解复用器

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Low-RON Low-Voltage SPST Analog Switch

文件：776.77 Kbytes Page：11 Pages

Low-Voltage SPST Analog Switch

文件：1.03392 Mbytes Page：13 Pages

Low RON Low Voltage SPST Analog Switch

文件：455.28 Kbytes Page：11 Pages

Silicon PNP epitaxial planar type(For power switching)

For power switching Complementary to 2SD1707 ■ Features ● Low collector to emitter saturation voltage VCE(sat) ● Satisfactory linearity of foward current transfer ratio hFE ● Large collector current IC ● Full-pack package which can be installed to the heat sink with one screw

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED MICROPROCESSORS?

Description The SC1156 is a low-cost, full featured synchronous, voltage-mode controller designed for use in single ended power supply applications where efficiency is of primary concern. Synchronous operation allows for the elimination of heat sinks in many applications. The SC1156 is ideal for

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED MICROPROCESSORS?

Description The SC1156 is a low-cost, full featured synchronous, voltage-mode controller designed for use in single ended power supply applications where efficiency is of primary concern. Synchronous operation allows for the elimination of heat sinks in many applications. The SC1156 is ideal for

Photo Modules for PCM Remote Control Systems

Description The TSOP11.. – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the

Quad High Side Micropower MOSFET Driver with Internal Charge Pump

文件：231.85 Kbytes Page：8 Pages