4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

ACD354x Single Channel 14-bit 250MSPS and 500MSPS Analog-to-Digital Converter (ADC)

1 Features • 14-bit, single channel 250 and 500MSPS ADC • Noise spectral density: -158.5dBFS/Hz • Thermal Noise: 74.5dBFS • Single core (non-interleaved) ADC architecture • Power consumption: – 435mW (500MSPS) – 369mW (250MSPS) • Aperture jitter: 75fs • Buffered analog inputs – Programma

FUSE HOLDER SELECTION GUIDE

文件：258.149 Kbytes Page：4 Pages

THRU-HOLE THREADED INSERT W/FLANGE

文件：121.32 Kbytes Page：1 Pages

Fuse Blocks and Clips - For 3AG Fuses

文件：100.29 Kbytes Page：1 Pages

REMOCON MODULE

文件：303.32 Kbytes Page：8 Pages