Bipolar IC For Power Factor Correction

■Description FA5331P(M) and FA5332P(M) are control ICs for a power factor correction system. These ICs use the average current control system to ensure stable operation. With this system, a power factor of 99 or better can be achieved. ■Features • Drive circuit for connecting a power MO

Bipolar IC For Power Factor Correction

■Description\nFA5331P(M) and FA5332P(M) are control ICs for a power factor correction system. These ICs use the average current control system to ensure stable operation. With this system, a power factor of 99% or better can be achieved.■ • Drive circuit for connecting a power MOS-FET(Io = ±1.5A)\n• Pulse-by-pulse overcurrent and overvoltage limiting function\n• Output ON/OFF control function by external signals\n• External synchronizing signal terminal for synchronous operation with other circuits\n• Undervoltage malfunction prevent;

Bipolar IC For Power Factor Correction

■ Description\nFA5331P(M) and FA5332P(M) are control ICs for a power factor correction system. These ICs use the average current control system to ensure stable operation. With this system, a power factor of 99% or better can be achieved.\nFA5331P(M) is a 1st generation IC and FA5332P(M) is 2nd • Drive circuit for connecting a power MOS-FET(Io =±1.5A)\n• Pulse-by-pulse overcurrent and overvoltage limiting function\n• Output ON/OFF control function by external signals\n• External synchronizing signal terminal for synchronous operation with other circuits\n• Undervoltage malfunction preventi;

2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

8-Pin, Stereo A/D Converter for Digital Audio

General Description The CS5330A/31A is a complete stereo analog-to-digital converter that performs anti-alias filtering, sampling and analog-to-digital conversion generating 18-bit values for both left and right inputs in serial form. The output sample rate can be infinitely adjusted between 2

Single Phase Bridge Rectifier 6 Amp

Features: ● High Case Dielectric Strength of 1500VRMS ● Surge Overload Rating: 250A (Peak) ● Ideal for Printed Circuit Board ● Reliable Construction Utilizing Molded Plastic Technique ● Glass Passivated Chip Junctions