Dual Path Lowband RF Receiver 400MHz to 1100MHz

DESCRIPTION This document describes the specifications for the F1130 Dual Path RF Receiver consisting of RF amplifier with bypass, DSA, RF Mixer and IF amplifier in each signal path. Applications include Multi-mode, Multi-carrier BaseStation Receivers. F1130 supports the following frequencie

Dual Path RF to IF Mixer - 400MHz to 1100MHz

The F1130 RF front-end offers 19dB gain with 3.5dB NF and +37dBm OIP3 performance. The digital step attenuator provides 30dB adjustment range in 2 dB steps via the SPI interface controller. For strong signal conditions, each RF amplifier can be bypass controlled via the SPI interface. The RF front-e • Dual path for MIMO systems\n• RF: 400MHz to 1100MHz\n• LO: 500MHz to 1300MHz\n• IF: 25MHz to 400MHz\n• Bypassable RF amplifiers for strong signal conditions\n• 19dB RF front-end power gain\n• +37dBm RF front-end OIP3 (Bypass OFF)\n• +43dBm RF front-end OIP3 (Bypass ON)\n• 3.5dB front-end NF at 900;

25A - 110 / 230V AC Variable Burst Fired AC Regulator

KEY FEATURES:  Integrated High-Speed Fuse: Ensures reliable protection and operation.  Built-In Heatsink & Mounting Plate: Facilitates efficient heat dissipation and easy installation.  Radio Frequency Interference (RFI) Free: Delivers clean, interference-free operation.  Single-Entry Cabl

EVR-1kW | EVR-4kW | EVR-6kW Phase-Angle Power Controller

KEY FEATURES:  Wide range of control signal options (manual, voltage, or current input).  Convection air-cooled heatsink.  Soft-start function (adjustable 0–20 seconds) to protect loads and extend component life.  Integrated SCR-type (Triac protection) high-speed fuse.  Compact, enclosed

EVR-1kW | EVR-4kW | EVR-6kW Phase-Angle Power Controller

KEY FEATURES:  Wide range of control signal options (manual, voltage, or current input).  Convection air-cooled heatsink.  Soft-start function (adjustable 0–20 seconds) to protect loads and extend component life.  Integrated SCR-type (Triac protection) high-speed fuse.  Compact, enclosed

Dual Path Lowband RF Receiver 400MHz to 1100MHz

DESCRIPTION This document describes the specifications for the F1130 Dual Path RF Receiver consisting of RF amplifier with bypass, DSA, RF Mixer and IF amplifier in each signal path. Applications include Multi-mode, Multi-carrier BaseStation Receivers. F1130 supports the following frequencie

Dual Path Lowband RF Receiver 400MHz to 1100MHz

DESCRIPTION This document describes the specifications for the F1130 Dual Path RF Receiver consisting of RF amplifier with bypass, DSA, RF Mixer and IF amplifier in each signal path. Applications include Multi-mode, Multi-carrier BaseStation Receivers. F1130 supports the following frequencie

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator

9x14 mm FR-4, 3.3 Volt, PECL, Clock Oscillator • Former Champion Product • Clock Recovery, Optic Transmission Equipment, Digital Cross Connect Equipment

Dual Path Lowband RF Receiver 400 MHz to 1100 MHz

文件：2.5511 Mbytes Page：40 Pages

Dual Path Highband RF Receiver 1400MHz to 2700MHz

文件：3.27889 Mbytes Page：43 Pages

封装/外壳：48-WFQFN 裸露焊盘 包装：卷带（TR） 描述：VFQFPN 7.00X7.00X0.80 MM, 0.50MM RF/IF，射频/中频和 RFID 射频放大器

射频混合器 Dual RF Down Converting Mixer

射频混合器 Dual RF Down Converting Mixer

封装/外壳：48-WFQFN 裸露焊盘 包装：卷带（TR） 描述：VFQFPN 7.00X7.00X0.80 MM, 0.50MM RF/IF，射频/中频和 RFID 射频放大器

PNP SILICON BIAS RESISTOR TRANSISTOR

This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The

0.25關m Sea of Gates and Customer Structured Arrays

DESCRIPTION Oki’s 0.25µm Application-Specific Integrated Circuit (ASIC) products are available in both Sea Of Gates (SOG) and Customer Structured Array (CSA) architectures. Both the SOG-based MG115P series and the CSA-based MG75P series use a five-layer metal process on 0.25µm drawn (0.18µm L-eff

6-Pin DIP Optoisolators Darlington Output

6-Pin DIP Optoisolators Darlington Output The MTIL113 device consists of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. This device is designed for use in applications requiring high collector output currents at lower input currents

Reference Diode

文件：126.55 Kbytes Page：4 Pages

Reference Diode

文件：126.55 Kbytes Page：4 Pages