Differential Driver Evaluation Board

High voltage gate driver IC

The EVAL_1ED020I12-B2 contains two IGBT gate drivers 1ED020I12-B2 in a half bridge configuration and an IGBT module FS25R12W1T4_B11 where only two IGBTs are connected. The evaluation board provides the following main features  Galvanic isolation by the coreless transformer technology of the In

3300 W 54 V bi-directional phase-shift fullbridge with 600 V CoolMOS CFD7 and XMC

Scope and purpose This document introduces a complete Infineon Technologies AG system solution for a 3300 W bi-directional DC-DC converter that achieves 98 percent efficiency in buck mode and 97 percent in boost mode. The EVAL_3K3W_BIDI_PSFB board is a DC-DC stage with telecom-level output real

3300 W bridgeless totem-pole PFC with CoolSiC™, CoolMOS™, and XMC™ digital control

Summary of Features SiC-based totem-pole PFC Highest eff iciency with CoolMOS™ andCoolSiC™ SMD solution for high power density Digital control enabled by XMC1402

DC to 18 GHz, Ultra Wideband, Dual Rank, 4 GSPS Track-and-Hold Amplifier

FEATURES 18 GHz input sampling bandwidth (1 V p-p full-scale) 4 GSPS maximum sampling rate 67 dB SFDR at 4 GHz and 0.5 V p-p input and CLK = 1 GSPS) 56 dB SFDR at 4 GHz and 1 V p-p input and CLK = 1 GSPS) Direct coupled input/output Ultra clean output waveforms, minimal glitching ≥65 dB hol

GaAs, MMIC, SPDT Switch, 10 kHz to 3 GHz

GENERAL DESCRIPTION The HMC221B is a single-pole, double-throw (SPDT) switch specified from 10 kHz to 3 GHz in a 6-lead SOT-23 plastic package. This switch offers a very low insertion loss of less than 0.8 dB up to 3 GHz and is well suited for receiver and filter switching applications that requi

Cellular infrastructure

GENERAL DESCRIPTION The HMC832 is a 3.3 V, high performance, wideband, fractional-N, phase-locked loop (PLL) that features an integrated voltage controlled oscillator (VCO) with a fundamental frequency of 1500 MHz to 3000 MHz, and an integrated VCO output divider (divide by 1/2/4/6/…60/62), that

Dual-channel 12-bit 40Msps 215mW A/D converter

Features ■ Low power consumption: 215 mW@40 Msps ■ Single supply voltage: 2.5 V ■ Independent supply for CMOS output stage with 2.5 V/3.3 V capability ■ SFDR = -75 dBc @ Fin = 10 MHz ■ 1GHz analog bandwidth track-and-hold ■ Common clocking between channels ■ Dual simultaneous sample and ho

Single-channel isolated gate driver IC

Features • Single-channel galvanically isolated coreless transformer based gate driver • Separate outputs, output UVLO referenced to GND2 or adjustable output UVLO options • For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs • Up to 6.5 A typical peak output current • 40

Single-channel isolated gate driver IC

Features • Single-channel galvanically isolated coreless transformer based gate driver • Separate outputs, output UVLO referenced to GND2 or adjustable output UVLO options • For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs • Up to 6.5 A typical peak output current • 40

Single-channel isolated gate driver IC

Features • Single-channel galvanically isolated coreless transformer based gate driver • Separate outputs, output UVLO referenced to GND2 or adjustable output UVLO options • For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs • Up to 6.5 A typical peak output current • 40

Single-channel isolated gate driver IC

Features • Single-channel galvanically isolated coreless transformer based gate driver • Separate outputs, output UVLO referenced to GND2 or adjustable output UVLO options • For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs • Up to 6.5 A typical peak output current • 40

EiceDRIVER™ F3 Enhanced (1ED332x) – Single- channel isolated gate driver family with short-circuit protection

Features  For up to 2300 V IGBTs, SiC and Si MOSFETs  +6 A / -8.5 A typical sinking and sourcing peak output current  Precise VCEsat detection (DESAT) with fault output  Soft turn-off after desaturation detection  Active Miller Clamp  40 V absolute maximum output supply voltage  85 n

EiceDRIVER™ F3 Enhanced (1ED332x) – Singlechannel isolated gate driver family with short-circuit protection

Features  For up to 2300 V IGBTs, SiC and Si MOSFETs  +6 A / -8.5 A typical sinking and sourcing peak output current  Precise VCEsat detection (DESAT) with fault output  Soft turn-off after desaturation detection  Active Miller Clamp  40 V absolute maximum output supply voltage  85 n

Single-channel isolated gate driver IC with adjustable DESAT and soft-off

Features • 600 V, 650 V, 900 V, and 1200 V IGBTs, SiC and Si MOSFETs • 40 V absolute maximum output supply voltage • ±3 A, ±6 A, and ±9 A typical sinking and sourcing peak output current • Separate source and sink outputs for hard switching and with active Miller clamp/clamp driver • Adjustme

High voltage gate driver IC

3.1 +5V and +15V supply voltages The driver’s high side voltage has to be supplied externally. The 5V supply voltage, required for on board circuits, is generated internally by an Infineon voltage regulator. The evaluation board does not provide an over voltage supply monitoring, therefore the

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2ED314xMC12L (2ED-X3 Compact) Dual-channel isolated gate driver IC with dead-time control

Features • Dual-channel isolated gate driver • For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs • Up to 6.5 A typical peak output current • 39 ns propagation delay with 5 ns channel-to-channel delay mismatch (skew) • 35 V absolute maximum output supply voltage • High c

Evaluation Board AD1555/1556 24-Bit ADC

GENERAL DESCRIPTION The AD1555 is a complete sigma-delta modulator, combined with a programmable gain amplifier intended for low frequency,high dynamic range measurement applications. The AD1555 outputs a ones-density bitstream proportional to the analog input. When used in conjunction with the

Evaluation Board AD1555/1556 24-Bit ADC

GENERAL DESCRIPTION The AD1555 is a complete sigma-delta modulator, combined with a programmable gain amplifier intended for low frequency,high dynamic range measurement applications. The AD1555 outputs a ones-density bitstream proportional to the analog input. When used in conjunction with the

Evaluation Board AD1555/1556 24-Bit ADC

GENERAL DESCRIPTION The AD1555 is a complete sigma-delta modulator, combined with a programmable gain amplifier intended for low frequency,high dynamic range measurement applications. The AD1555 outputs a ones-density bitstream proportional to the analog input. When used in conjunction with the

24-Bit, 192 kHz, DAC

GENERAL DESCRIPTION The AD1833A is a complete, high performance, single-chip, multichannel, digital audio playback system. It features six audio playback channels, each comprising a high performance digital interpolation filter, a multibit S-D modulator featuring Analog Devices’ patented techno

Multichannel 24-Bit, 192 kHz, DAC

GENERAL DESCRIPTION The AD1833 is a complete, high-performance, single-chip, multi channel, digital audio playback system. It features six audio playback channels each comprising a high-performance digital nterpolation filter, a multibit sigma-delta modulator featuring Analog Devices patented t

2 ADC, 8 DAC, 96 kHz, 24-Bit Codecs

PRODUCT OVERVIEW The AD1835A is a high performance, single-chip codec featuring four stereo DACs and one stereo ADC. Each DAC comprises a high performance digital interpolation filter, a multibit Σ-Δ modulator featuring Analog Devices’ patented technology, and a continuous-time voltage out analog

Multichannel 96 kHz Codec

PRODUCT OVERVIEW The AD1836A is a high performance, single-chip codec that provides three stereo DACs and two stereo ADCs using ADI’s patented multibit Σ-∆ architecture. An SPI® port is included, allowing a microcontroller to adjust volume and many other parameters. The AD1836A operates from a 5

2 ADC, 8 DAC, 96 kHz, 24-Bit Codec

GENERAL DESCRIPTION The AD1837A is a high performance single-chip codec featuring four stereo DACs and one stereo ADC. Each DAC comprises a high performance digital interpolation filter, a multibit Σ-Δ modulator featuring Analog Devices’ patented technology, and a continuous-time voltage out anal

2 ADC, 8 DAC, 96 kHz, 24-Bit Codec

PRODUCT OVERVIEW The AD1837 is a high performance single-chip codec featuring four stereo DACs and one stereo ADC. Each DAC comprises a high performance digital interpolation filter, a multibit Σ-Δ modulator featuring Analog Devices’ patented technology, and a continuous-time voltage out analog s

2 ADC, 6 DAC, 96KHZ 24 BIT CODEC

GENERAL DESCRIPTION The AD1838A is a high performance single-chip codec featuring three stereo DACs and one stereo ADC. Each DAC comprises a high performance digital interpolation filter, a multibit
- modulator featuring Analog Devices’ patented technology, and a continuous-time voltage out a

2 ADC, 6 DAC, 96 kHz, 24-Bit sigma-delta Codec

PRODUCT OVERVIEW The AD1839 is a high performance single-chip codec featuring three stereo DACs and one stereo ADC. Each DAC comprises a high performance digital interpolation filter, a multibit Σ-Δ modulator featuring Analog Devices’ patented technology, and a continuous-time voltage out analog

Stereo, 24-Bit, 192 kHz, Multibit, Sigma-Delta DAC

GENERAL DESCRIPTION The AD1852 is a complete, high performance, single-chip, stereo digital, audio playback system. It is comprised of a multibit, Σ-Δ modulator, digital interpolation filters, and analog output drive circuitry. Other features include an on-chip, stereo attenuator and mute, prog

Stereo, 24-Bit, 192 kHz, Multibit, Sigma-Delta DAC

FEATURES 5 V stereo audio DAC system Accepts 16-bit/18-bit/20-bit/24-bit data Supports 24 bits, 192 kHz sample rate Accepts a wide range of sample rates including 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, and 192 kHz Multibit Σ-Δ modulator with perfect differential linearity restoration for re

Stereo Audio, 24-Bit, 96 kHz, Multibit
- ADC

PRODUCT OVERVIEW The AD1871 is a stereo audio ADC intended for digital audio applications requiring high performance analog-to-digital conversion. It features two 24-bit conversion channels each with programmable gain amplifier (PGA), multibit sigma-delta modulator, and decimation filters. Each

Stereo Audio, 24-Bit, 96 kHz, Multibit
- ADC

PRODUCT OVERVIEW The AD1871 is a stereo audio ADC intended for digital audio applications requiring high performance analog-to-digital conversion. It features two 24-bit conversion channels each with programmable gain amplifier (PGA), multibit sigma-delta modulator, and decimation filters. Each

2 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec

GENERAL DESCRIPTION The AD1928 is a high performance, single-chip codec that provides two analog-to-digital converters (ADCs) with differ ential input and eight digital-to-analog converters (DACs) with single-ended output using the Analog Devices, Inc., patented multibit sigma-delta (Σ-Δ) archite

2 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec

GENERAL DESCRIPTION The AD1928 is a high performance, single-chip codec that provides two analog-to-digital converters (ADCs) with differ ential input and eight digital-to-analog converters (DACs) with single-ended output using the Analog Devices, Inc., patented multibit sigma-delta (Σ-Δ) archite

8-Channel DAC with PLL, 192 kHz, 24 Bits

GENERAL DESCRIPTION The AD1934 is a high performance, single chip that provides eight digital-to-analog converters (DACs) with single-ended output using the Analog Devices, Inc., patented multibit sigma-delta (Σ-Δ) architecture. An SPI port is included, allowing a microcontroller to adjust volume

4 ADC/8 DAC with PLL, 192 kHz, 24 Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24 Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24 Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

Four ADCs/Eight DACs with PLL, 192 kHz, 24-Bit Codec

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec

FEATURES PLL generated or direct master clock Low EMI design 108 dB DAC/107 dB ADC dynamic range and SNR −94 dB THD + N 3.3 V single supply Tolerance for 5 V logic inputs Supports 24 bits and 8 kHz to 192 kHz sample rates Differential ADC input Single-ended DAC output Log volume control

4 ADC/8 DAC with PLL, 192 kHz, 24-Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24 Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec

GENERAL DESCRIPTION The AD1939 is a high performance, single-chip codec that provides four analog-to-digital converters (ADCs) with differential input, and eight digital-to-analog converters (DACs) with differential output using the Analog Devices, Inc. patented multibit sigma-delta (Σ-Δ) archi

8-Channel DAC with PLL and Differential Outputs, 192 kHz, 24 Bits

GENERAL DESCRIPTION The AD1933 is a high performance, single chip that provides eight digital-to-analog converters (DACs) with differential output using the Analog Devices, Inc., patented multibit sigma delta (Σ-Δ) architecture. An SPI port is included, allowing a microcontroller to adjust volu

8-Channel DAC with PLL and Differential Outputs, 192 kHz, 24 Bits

FEATURES PLL generated or direct master clock Low EMI design DAC with 110 dB dynamic range and SNR −96 dB THD + N 3.3 V single supply Tolerance for 5 V logic inputs Supports 24 bits and 8 kHz to 192 kHz sample rates Differential DAC output Log volume control with autoramp function SPI® c

4 ADC/8 DAC with PLL, 192 kHz, 24-Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

4 ADC/8 DAC with PLL, 192 kHz, 24 Bit CODEC

GENERAL DESCRIPTION The AD193X family are high performance, single-chip codecs that provide 4 ADCs with differential input and 8 DACs with either single-ended or differential output using ADI’s patented multibit sigma-delta architecture. An SPI® or I2C® port is included, allowing a microcontrol

SigmaDSP-TM Multichannel 28-Bit Audio Processor

GENERAL DESCRIPTION The AD1940/AD1941 are a complete 28-bit, single-chip, multichannel audio SigmaDSP™ for equalization, multiband dynamic processing, delay compensation, speaker compensation, and image enhancement. These algorithms can be used to compensate for the real world limitations of spea

SigmaDSP??3-Channel, 26-Bit Signal Processing DAC

PRODUCT OVERVIEW The AD1953 is a complete 26-bit, single-chip, 3-channel digital audio playback system with built-in DSP functionality for speaker equalization, dual-band compression/limiting, delay compensation, and image enhancement. These algorithms can be used to compensate for real-world lim

SigmaDSP??3-Channel, 26-Bit Signal Processing DAC

FEATURES AC ’97 2.3 COMPATIBLE FEATURES 6 DAC Channels for 5.1 Surround S/PDIF Output Integrated Stereo Headphone Amplifier Variable Rate Audio Double Rate Audio (fS = 96 kHz) Greater than 90 dB Dynamic Range 20-Bit PCM DACs Line-Level Mono ”Phone” Inpu

SigmaDSP??3-Channel, 26-Bit Signal Processing DAC

GENERAL DESCRIPTION The AD1954 is a complete 26-bit single-chip 3-channel digital audio playback system with built-in DSP functionality for speaker equalization, dual-band compression/limiting, delay compensation, and image enhancement. These algorithms can be used to compensate for real-world li

High Performance Multibit DAC with SACD Playback

FEATURES 5 V Power Supply Stereo Audio DAC System Accepts 16-/18-/20-/24-Bit Data Supports 24-Bit, 192 kHz Sample Rate PCM Audio Data Supports SACD Bit Stream and External Digital Filter Interface Accepts a Wide Range of PCM Sample Rates Including: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

PLL/Multibit DAC

PRODUCT OVERVIEW The AD1958 is a complete high-performance single-chip stereo digital audio playback system. It is comprised of a multibit sigmadelta modulator, digital interpolation filters, and analog output drive circuitry with an on-board dual PLL clock generator. Other features include an on

包装：散装 描述：AUTOMOTIVE 3G EVAL MOD CELLULAR 开发板，套件，编程器 射频评估和开发套件，开发板

包装：散装 描述：AUTOMOTIVE 3G EVAL MOD CELLULAR 开发板，套件，编程器 射频评估和开发套件，开发板

适用于可穿戴设备和移动蜂窝物联网应用的超低功耗 GNSS LNA（评估板）

适用于可穿戴设备和移动蜂窝物联网应用的超低功耗 GNSS LNA（评估板）

15W 5V charger reference design with 700V CoolMOS P7

文件：2.81626 Mbytes Page：16 Pages