42V/0.6A高压异步降压转换器

The ETA2841 is a wide input range, high-efficiency, and high frequency DC-to-DC step-down switching regulator, capable of delivering up to 0.6A of output current. With a fixed switching frequency of 650KHz, this current mode PWM controlled converter allows the use of small external components. • Wide Input Operating Range from 4V to 38V\n\n• Standoff Input Voltage: 42V\n\n• High Efficiency at 12V In 5V Out: Up to 91%:\n\n• High Efficiency PFM mode at light load\n\n• Capable of Delivering 0.6A\n\n• No External Compensation Needed\n\n• Current Mode control\n\n• Logic Control Shutdown\n\;

42V Input Standoff Voltage, 0.6A Step-Down Converter in SOT23-6

文件：198.95 Kbytes Page：1 Pages

丝印代码：EGYW；42V Input Standoff Voltage, 0.6A Step-Down Converter in SOT23-6

文件：198.95 Kbytes Page：1 Pages

Automotive Current Mode PWM Control Circuit

Description The CS2841B provides all the necessary features to implement offline fixed frequency current-mode control with a minimum number of external components. Features ■ Optimized for Off-line Control ■ Internally Trimmed Temperature Compensated Oscillator ■ Maximum Duty-cycle Clamp ■ V

Wideband, Fast Settling, Unity Gain Stable, Video Operational Amplifier

The HA-2841 is a wideband, unity gain stable, operational amplifier featuring a 50MHz unity gain bandwidth, and excellent DC specifications. This amplifier’s performance is further enhanced through stable operation down to closed loop gains of +1, the inclusion of offset null controls, and by its

Dual 10-bit bus interface latch 3-State

DESCRIPTION The MB2841 Bus interface register is designed to provide extra data width for wider data/address paths of buses carrying parity. The MB2841 consists of two sets of ten D-type latches with 3-State outputs. The flip-flops appear transparent to the data when Latch Enable (nLE) is High.

Dual 10-bit bus interface latch 3-State

DESCRIPTION The MB2841 Bus interface register is designed to provide extra data width for wider data/address paths of buses carrying parity. The MB2841 consists of two sets of ten D-type latches with 3-State outputs. The flip-flops appear transparent to the data when Latch Enable (nLE) is High.

Programmable, Off-Line, PWM Controller

文件：923.48 Kbytes Page：9 Pages