60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per ampli

60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per

丝印代码：5411IREZ；60MHz Rail-to-Rail Input-Output Op Amps

文件：857.07 Kbytes Page：19 Pages

60MHz Rail-to-Rail Input-Output Op Amps

文件：493.66 Kbytes Page：18 Pages

60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per

60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per ampli

60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per ampli

60MHz Rail-to-Rail Input-Output Op Amps

The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per

60MHz Rail-to-Rail Input-Output Op Amps

文件：493.66 Kbytes Page：18 Pages

丝印代码：5411IREZ；60MHz Rail-to-Rail Input-Output Op Amps

文件：857.07 Kbytes Page：19 Pages

丝印代码：5411IREZ；60MHz Rail-to-Rail Input-Output Op Amps

文件：857.07 Kbytes Page：19 Pages

60MHz Rail-to-Rail Input-Output Op Amps

文件：493.66 Kbytes Page：18 Pages

5 mm T1 3/4 LED, Non Diffused Super-Bright LED

Features ● colored, clear package ● for use as optical indicator in bright ambient light ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

5 mm T1 3/4 LED, Non Diffused Super-Bright LED

Features ● colored, clear package ● for use as optical indicator in bright ambient light ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

Silicon Controlled Rectifier (SCR) 4 Amp, Sensitive Gate

Description: The NTE5411 through NTE5416 are PNPN silicon controlled rectifier (SCR) devices designed for high volume consumer applications such as temperature, light, and speed control: process and remote control, and warning systems where reliability of operation is important. Features:

2B1Q U INTERFACE DEVICE

GENERAL DESCRIPTION STLC5411 is a complete monolithic transceiver for ISDN Basic access data transmission on twisted pair subscriber loops typical of public switched telephone networks. The device is fully compatible with both ANSI T1.601-1988 U.S. and CSE (C32-11) French specifications. It is in

2B1Q U INTERFACE DEVICE

GENERAL DESCRIPTION STLC5411 is a complete monolithic transceiver for ISDN Basic access data transmission on twisted pair subscriber loops typical of public switched telephone networks. The device is fully compatible with both ANSI T1.601-1988 U.S. and CSE (C32-11) French specifications. It is in