Features

ReDriver

y 10Gbps Serial Link with Linear Equalizer

y USB3.2 Gen 2x2

y Four 10Gbps Differential Signal Pairs

y Pin Mode Control for EQ/Flat Gain/Swing

y 100Ω Differential CML I/O’s

y Automatic Receiver Detect

y Single Supply Voltage: 3.3V

Plug-In Detector

y USB Type-C Specification 2.0

y Supports SOURCE (DFP)/DRP Modes

y Auto-Configure Ports Orientation through CC Detection

y Supports VCONN to Power Active Cables and Other Accessories

y Supports Detecting Debug Accessory Mode (DAM) as Source

(Rd /Rd Detection) if Configuring the Port as DFP

y Supports Detecting DAM as both Source & Sink (Rp/Rp detection)

if Configuring the Port as DRP

y DEBUG Pin to Enable SBU Isolation for Compliance Requirement

y Supports Over-Current Protection and Over-Voltage Protection for

VCONN

y Allow Both Pin Control and I2C Interface

y Integrated Power Switches, High-Precision Resistors and

Current Sources for CC Pins

y Provides Support for Default USB Power, 1.5A and 3A SOURCE

Modes w ith Pin C ontrol

y Output Indicator for Plug-In Detection

y Power Saving Mode

y 24V Tolerance on CC1, CC2 and VBUSDET

y Power Supply Range : 3.0V to 5.0V

y Temperature Range: 0oC to 70oC

y Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

y Halogen and Antimony Free. “Green” Device (Note 3)

y For automotive applications requiring specific change control

(i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable,

and manufactured in IATF 16949 certified facilities), please

contact us o r your l ocal D iodes representative.

https://www.diodes.com/quality/product-definitions/

y Packaging (Pb-free & Green):

à 52-pin, 3.5mm x 9mm (ZL)