iButton端口

The DS9092R iButton® port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire® MicroLAN™ devices with reader/writers. The iButton port is available with groove (DS9092RG) and without (DS9092R). For applications where only a touch contact is needed either ve ·Empty stainless steel F5 MicroCan™ with opening in rear and solder tabs\n·Acts as a touch contact for remotely located 1-Wire devices\n·Together with DS2404S-C01 makes complex functions involving microcontrollers behave as if they were iButtons\n·DS9092R for DS9100-based iButton probes\n·DS9092RG g;

包装：管件 描述：IBTN PORT WITH GROOVE 存储卡，模块 专用

Empty stainless steel F5 MicroCan with opening in rear and solder tabs

文件：59.34 Kbytes Page：2 Pages

RTC iButton

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

ISO2-CMOS ST-BUS??FAMILY Digital Telephone with HDLC (HPhone-II)

Description The MT9092 HPhone-II is a fully featured integrated digital telephone circuit which includes an HDLC data formatter. Voice band signals are converted to digital PCM and vice versa by a switched capacitor Filter/Codec. The Filter/Codec uses an ingenious differential architecture to ach

ISO2-CMOS ST-BUS??FAMILY Digital Telephone with HDLC (HPhone-II)

Description The MT9092 HPhone-II is a fully featured integrated digital telephone circuit which includes an HDLC data formatter. Voice band signals are converted to digital PCM and vice versa by a switched capacitor Filter/Codec. The Filter/Codec uses an ingenious differential architecture to ach

6 - 18 GHz High Power Amplifier

Key Features and Performance • Dual Channel Power Amplifier • 0.25um pHEMT Technology • 6-18 GHz Frequency Range • 2.8 W/Channel Midband Pout • 5.6 W Pout Combined • 25 dB Nominal Gain • Balanced In/Out for Low VSWR • 8V @ 1.2A per Channel Bias Primary Applications • X-Ku band P