Real-Time Clock/calendar in binary format RTC iButton Over 10 years of operation

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

Serial Number iButton

General Description The DS1990A serial number iButton® is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1990A h

RTC iButton

Special Features •Real-time clock/calendar in binary format •Uses the same binary time/daterepresentation as the DS1994 but with1 second resolution •Clock accuracy is better than ±2 minutes permonth at +25°C •Operating temperature range from -40°C to+85°C •Over 10 years of operation Common

RTC iButton

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

1024-Bit EEPROM iButton

General Description The DS1972 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each in a rugged iButton® package. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually

iButton探头

DS9092 iButton®探头提供与DS19xx系列iButton之间传输数据所需的电气接触。圆形探头提供了一个自动对齐接口，可轻松匹配iButton的MicroCan封装的圆形边缘。金属触点耐磨损且易于保持清洁。\n\n DS9092配有扁平面板（标准）或可选的触觉反馈。标准读取器的中心触点没有移动部件，因此该接口更加坚固，适用于恶劣环境。这种类型的探头非常适合iButton与读取器接触的设计。\n\n 触觉反馈探头非常适合iButton静止且可移动读取器与其接触的情况。\n\n 两种类型的探头均提供面板安装版本。触觉反馈探头还有手柄安装版本。面板安装探头通 • 简单、低成本的金属冲压件构成iButton系列的读/写探头\n\n• 探头引导iButton的进入\n\n• iButton在表面上滑动以自清洁触点\n\n• 可触及的浅探头腔简化了泥浆等碎屑的清除过程\n\n• 灵活的设计支持面板安装或手柄安装，并带有可选的触觉反馈\n\n• 明亮的防锈金属表面支持进行数百万次操作\n\n• 预接线的面板安装探头，易于安装\n\n• 手柄探头与RJ-11插孔对接，便于快速安装;

Hygrochron Temperature/Humidity Logger

文件：649.39 Kbytes Page：55 Pages

Logs Up to 2048 Consecutive Temperature Thermochron iButton

文件：675.51 Kbytes Page：42 Pages

iButton Probe

文件：274.62 Kbytes Page：3 Pages

iButton High-Capacity Temperature Logger with 122KB Data-Log Memory

文件：902.91 Kbytes Page：46 Pages

DeepCover Secure Authenticator iButton with SHA-256

文件：599 Kbytes Page：13 Pages

iButton Probe

DESCRIPTION The DS9092 iButton Probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton’s MicroCan package. Metal contacts res

iButton开发板

The DS9092K iButton® Starter Kit provides the basic hardware for a quick evaluation of the Maxim iButton family of products that communicate using the 1-Wire® protocol. The kit uses the USB port of a Microsoft Windows®-based Personal Computer running Vista™, XP SP2 (or higher), or Microsoft Server O • Starter Kit to help evaluate iButton technology using a Microsoft Windows-based PC \n• Easy Setup with USB adapter \n• Free download of 1-Wire drivers and OneWireViewer Demonstration Software;

带LED的iButton探头

带LED的DS9092L iButton®探头提供与DS19xx系列iButton之间传输数据所需的电气接触。圆形探头提供了一个自动对齐接口，可轻松匹配iButton的MicroCan™封装的圆形边缘。实心金属触点耐磨损且易于保持清洁。\n\n DS9092L没有移动部件，因此该接口较为坚固，适用于恶劣环境。DS9092L的圆形中心触点装有LED，在电压为2.7V（典型值）时额定电流为20mA DC（最大值）。\n\n 探头配有用于面板安装的黄铜M18 x 1螺母。由于探头主体也形成接地触点，因此面板应采用非导电材料以避免接地环路。提供带连接器的30cm电缆，以便轻松连接到 • 适用于iButton系列的实心金属读/写面板安装探头\n\n• 用于用户反馈信号的集成绿色LED\n\n• 探头引导iButton的进入\n\n• iButton在表面上滑动以自清洁触点\n\n• 可触及的浅探头腔简化了泥浆等碎屑的清除过程\n\n• 探头适用于厚度不超过3mm的面板\n\n• 触点由实心303不锈钢制成，带有蓝色尼龙绝缘层\n\n• 预接线的公制设计，易于安装;

iButton Probe with LED

DESCRIPTION The DS9092L iButton Probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton’s MicroCan package. The soli

iButton Probe

文件：274.62 Kbytes Page：3 Pages

包装：托盘 描述：CONN IBUTTON CARD PUSH-PULL 连接器，互连器件 PC 卡插座

包装：托盘 描述：IBUTTON PROBE CONTACT ANGLED 连接器，互连器件 PC 卡插座

based iButtons branded with their respective character for optimum legibility

文件：56.73 Kbytes Page：2 Pages

iButton Probe

文件：274.62 Kbytes Page：3 Pages

Easy Setup with USB adapter

文件：121.4 Kbytes Page：3 Pages

Easy Setup with USB adapter

文件：121.4 Kbytes Page：3 Pages

iButton Probe with LED

文件：141.37 Kbytes Page：2 Pages

Empty stainless steel F5 MicroCan with opening in rear and solder tabs

文件：59.34 Kbytes Page：2 Pages

iButtonTM Port

文件：59.34 Kbytes Page：2 Pages

Empty stainless steel F5 MicroCan with opening in rear and solder tabs

文件：59.34 Kbytes Page：2 Pages

Empty stainless steel F5 MicroCan with opening in rear and solder tabs

文件：59.34 Kbytes Page：2 Pages

iButton Probe

文件：274.62 Kbytes Page：3 Pages

ISO2-CMOS ST-BUS??FAMILY Digital Telephone with HDLC (HPhone-II)

Description The MT9092 HPhone-II is a fully featured integrated digital telephone circuit which includes an HDLC data formatter. Voice band signals are converted to digital PCM and vice versa by a switched capacitor Filter/Codec. The Filter/Codec uses an ingenious differential architecture to ach

ISO2-CMOS ST-BUS??FAMILY Digital Telephone with HDLC (HPhone-II)

Description The MT9092 HPhone-II is a fully featured integrated digital telephone circuit which includes an HDLC data formatter. Voice band signals are converted to digital PCM and vice versa by a switched capacitor Filter/Codec. The Filter/Codec uses an ingenious differential architecture to ach

6 - 18 GHz High Power Amplifier

Key Features and Performance • Dual Channel Power Amplifier • 0.25um pHEMT Technology • 6-18 GHz Frequency Range • 2.8 W/Channel Midband Pout • 5.6 W Pout Combined • 25 dB Nominal Gain • Balanced In/Out for Low VSWR • 8V @ 1.2A per Channel Bias Primary Applications • X-Ku band P