Serial 1-Wire Line Driver with Load Sensor

DESCRIPTION The DS2480B is a serial port to 1-Wire interface chip that supports regular and Overdrive speeds. It connects directly to UARTs and 5V RS232 systems. Interfacing to RS232C (± 12V levels) requires a passive clamping circuit and one 5V to ±12V level translator. Internal timers relieve

Serial 1.Wire Line Driver

DESCRIPTION The DS2480 is a serial port to 1–Wire interface chip that supports standard and Overdrive speeds. It connects directly to UARTs and 5V RS232 systems. Interfacing to RS232C (±12V levels) requires a passive clamping circuit and one 5V to ±12V level translator. Internal timers relie

250MHz / 3mA Current Mode Feedback Amplifiers

General Description The EL2180C/EL2280C/EL2480C are single/dual/quad current-feedback operational amplifiers that achieve a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V or from sin

250MHz / 3mA Current Mode Feedback Amplifiers

General Description The EL2180C/EL2280C/EL2480C are single/dual/quad current-feedback operational amplifiers that achieve a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V or from sin

80V Triple Bias Clamp

文件：84.97 Kbytes Page：4 Pages

80V Triple Bias Clamp

文件：84.97 Kbytes Page：4 Pages