80V Triple Bias Clamp

General Description\nThe LM2480 driver is an Integrated 80V triple bias clamp circuit for DC recovery of each of the AC coupled outputs of a CRT driver. It is well matched with the DAC outputs of the LM126X family of pre-amplifiers. Each amplifier has its gain internally set to -18. The IC is packag ■ Wide range integrated triple bias clamp\n■ High input impedance\n■ Single supply operation\n■ Matched to the LM126X family of preamplifiersRecommended Applications\n■ CRT monitors requiring DC restoration at the cathodes;

80V Triple Bias Clamp

文件：84.97 Kbytes Page：4 Pages

80V Triple Bias Clamp

文件：84.97 Kbytes Page：4 Pages

封装/外壳：8-DIP（0.300"，7.62mm） 包装：卷带（TR） 描述：IC TRIPLE BIAS CLAMP 80V 8-DIP 集成电路（IC） 显示驱动器

Serial 1.Wire Line Driver

DESCRIPTION The DS2480 is a serial port to 1–Wire interface chip that supports standard and Overdrive speeds. It connects directly to UARTs and 5V RS232 systems. Interfacing to RS232C (±12V levels) requires a passive clamping circuit and one 5V to ±12V level translator. Internal timers relie

250MHz / 3mA Current Mode Feedback Amplifiers

General Description The EL2180C/EL2280C/EL2480C are single/dual/quad current-feedback operational amplifiers that achieve a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V or from sin

250MHz / 3mA Current Mode Feedback Amplifiers

General Description The EL2180C/EL2280C/EL2480C are single/dual/quad current-feedback operational amplifiers that achieve a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V or from sin