DLM1价格

参考价格:¥384.2095

型号:DLM1-156P 品牌:ITT 备注:这里有DLM1多少钱,2026年最近7天走势,今日出价,今日竞价,DLM1批发/采购报价,DLM1行情走势销售排行榜,DLM1报价。
型号 功能描述 生产厂家 企业 LOGO 操作
DLM1

ZERO INSERTION FORCE CONNECTORS

文件:3.24812 Mbytes Page:76 Pages

ITT

DLM1

深水液位传感器

MINYUAN

敏源传感

1.0A Ultrahigh-Speed Rectifier?

Features • Fast reverse recovery time and small switching loss. • Reverse voltage : VRM=200 to 400V. • Average rectified current : IO=1.0A. Applications • Switching regulators, high-frequency rectification.

SANYO

三洋

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODES VOLTAGE RANGE - 20 to 40 Volts

VOLTAGE RANGE - 20 to 40 Volts CURRENT - 0.35 Ampere FEATURES * For general purpose applications * Low turn-on voltage * Fast switching time * Protected by a PN junction guard ring against excessive voltage, such as electrostatic discharge(ESD)

DCCOM

道全

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODES VOLTAGE RANGE - 20 to 40 Volts

VOLTAGE RANGE - 20 to 40 Volts CURRENT - 0.35 Ampere FEATURES * For general purpose applications * Low turn-on voltage * Fast switching time * Protected by a PN junction guard ring against excessive voltage, such as electrostatic discharge(ESD)

DCCOM

道全

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODES VOLTAGE RANGE - 20 to 40 Volts

VOLTAGE RANGE - 20 to 40 Volts CURRENT - 0.35 Ampere FEATURES * For general purpose applications * Low turn-on voltage * Fast switching time * Protected by a PN junction guard ring against excessive voltage, such as electrostatic discharge(ESD)

DCCOM

道全

1.0A Ultrahigh-Speed Rectifier?

Features • Fast reverse recovery time and small switching loss. • Reverse voltage : VRM=200 to 400V. • Average rectified current : IO=1.0A. Applications • Switching regulators, high-frequency rectification.

SANYO

三洋

1.0A Ultrahigh-Speed Rectifier?

Features • Fast reverse recovery time and small switching loss. • Reverse voltage : VRM=200 to 400V. • Average rectified current : IO=1.0A. Applications • Switching regulators, high-frequency rectification.

SANYO

三洋

1.0A Ultrahigh-Speed Rectifier?

Features • Fast reverse recovery time and small switching loss. • Reverse voltage : VRM=200 to 400V. • Average rectified current : IO=1.0A. Applications • Switching regulators, high-frequency rectification.

SANYO

三洋

SMD/BLOCK Type EMI Suppression Filters

SMD/BLOCK Type EMI Suppression Filters

MURATA

村田

SMD/BLOCK Type EMI Suppression Filters

SMD/BLOCK Type EMI Suppression Filters

MURATA

村田

Small size chip common mode choke coil.

Features 1. Small size: 1.25x1.0x0.5mm 2. Suitable for noise suppression for personal mobile equipment 3. Effective to both differential mode and common mode noise. Common mode impedance: 600 ohm at 100MHz (typ.) Differential mode impedance: 1200Ω at 100MHz (Typ. DLM11GN601SZ2) 1300Ω at 10

MURATA

村田

Small size chip common mode choke coil.

Features 1. Small size: 1.25x1.0x0.5mm 2. Suitable for noise suppression for personal mobile equipment 3. Effective to both differential mode and common mode noise. Common mode impedance: 600 ohm at 100MHz (typ.) Differential mode impedance: 1200Ω at 100MHz (Typ. DLM11GN601SZ2) 1300Ω at 10

MURATA

村田

Small size chip common mode choke coil.

Features 1. Small size: 1.25x1.0x0.5mm 2. Suitable for noise suppression for personal mobile equipment 3. Effective to both differential mode and common mode noise. Common mode impedance: 600 ohm at 100MHz (typ.) Differential mode impedance: 1200Ω at 100MHz (Typ. DLM11GN601SZ2) 1300Ω at 10

MURATA

村田

Small size chip common mode choke coil.

Features 1. Small size: 1.25x1.0x0.5mm 2. Suitable for noise suppression for personal mobile equipment 3. Effective to both differential mode and common mode noise. Common mode impedance: 600 ohm at 100MHz (typ.) Differential mode impedance: 1200Ω at 100MHz (Typ. DLM11GN601SZ2) 1300Ω at 10

MURATA

村田

smd/block type emi suppression filters

SMD/BLOCK Type EMI Suppression Filters

MURATA

村田

SMD/BLOCK Type EMI Suppression Filters

SMD/BLOCK Type EMI Suppression Filters

MURATA

村田

SMD/BLOCK Type EMI Suppression Filters

SMD/BLOCK Type EMI Suppression Filters

MURATA

村田

Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

Small size and tight dimensional tolerance

1. Small size and tight dimensional tolerance Size:1.25x1.0x0.5mm Tolerance:+-0.1mm 2. High common mode impedance up to 90ohm (at 100MHz) is available. 3. DLM11S series enables noise suppression for differential signal line without distortion in highspeed signal transmission due to its line

MURATA

村田

1.0A Ultrahigh-Speed Rectifier

文件:51.65 Kbytes Page:3 Pages

SANYO

三洋

1.0A Ultrahigh-Speed Rectifier

文件:51.65 Kbytes Page:3 Pages

SANYO

三洋

6~10W DLM-B系列 引针焊接DC-DC电源模块电源

ETC

知名厂家

6~10W DLM-B系列 引针焊接DC-DC电源模块电源

ETC

知名厂家

600 WATTS PROGRAMMABLE DC SUPPLY

文件:169.78 Kbytes Page:3 Pages

POWERBOX

封装/外壳:DO-204AL,DO-41,轴向 包装:散装 描述:DIODE GEN PURP 200V 1A DO204AL 分立半导体产品 二极管 - 整流器 - 单

ONSEMI

安森美半导体

封装/外壳:DO-204AL,DO-41,轴向 包装:散装 描述:DIODE GEN PURP 400V 1A DO204AL 分立半导体产品 二极管 - 整流器 - 单

ONSEMI

安森美半导体

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

ZIF Connectors

文件:90.73 Kbytes Page:2 Pages

ITT

Operating Temperature Range

文件:216.49 Kbytes Page:3 Pages

MURATA

村田

Operating Temperature Range

文件:215.53 Kbytes Page:3 Pages

MURATA

村田

Operating Temperature Range

文件:214.71 Kbytes Page:3 Pages

MURATA

村田

Operating Temperature Range

文件:216.04 Kbytes Page:3 Pages

MURATA

村田

3000-4000 WATTS PROGRAMMABLE DC SUPPLY

文件:133.26 Kbytes Page:3 Pages

POWERBOX

3000-4000 WATTS PROGRAMMABLE DC SUPPLY

文件:133.26 Kbytes Page:3 Pages

POWERBOX

600 WATTS PROGRAMMABLE DC SUPPLY

文件:169.78 Kbytes Page:3 Pages

POWERBOX

3000-4000 WATTS PROGRAMMABLE DC SUPPLY

文件:133.26 Kbytes Page:3 Pages

POWERBOX

3000-4000 WATTS PROGRAMMABLE DC SUPPLY

文件:133.26 Kbytes Page:3 Pages

POWERBOX

DLM1产品属性

  • 类型

    描述

  • 型号

    DLM1

  • 制造商

    ITT

  • 制造商全称

    ITT Industries

  • 功能描述

    ZERO INSERTION FORCE CONNECTORS

更新时间:2026-3-13 9:14:00
IC供应商 芯片型号 品牌 批号 封装 库存 备注 价格
muRata(村田)
1.25*1.0mm
4907
全新原装正品现货可开票
MURATA(村田)
25+
-
18798
原装正品现货,原厂订货,可支持含税原型号开票。
MURATA/村田
14+
SMD
3340
原装现货 样品免费送 期待您的来电咨询
MURATA(村田)
25+
-
18798
原装正品现货,原厂订货,可支持含税原型号开票。
MURATA
23+
SMD
7850
只做原装正品假一赔十为客户做到零风险!!
MURATA/村田
2019+
SMD
4000
原厂渠道 可含税出货
MURATA(村田)
2021/2022+
标准封装
20000
原厂原装现货订货价格优势终端BOM表可配单提供样品
DLPOWER
23+
10000
原厂授权一级代理,专业海外优势订货,价格优势、品种

DLM1数据表相关新闻