Bridge Rectifiers (75)

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE-50 to 1000 Volts?

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE-50 to 1000 Volts?

SINGLE-PHASE SILICON BRIDGE RECTIFIER(VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Good for automation insertion * Surge overload rating - 50 Amperes peak * Ideal for printed circuit board * Reliable low cost construction * Glass passivated junction

GLASS PASSIVATED BRIDEG RECTIFIERS

REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.0 Ampere FEATURES ● Rating to 1000V PRV ● Ideal for printed circuit board ● Low forward voltage drop,high current capability ● Reliable low cost construction utilizing molded plastic technique results in inexpensive product ● The pl

SILICON BRIDGE RECTIFIERS

BREAKDOWN VOLTAGE: 6.8 --- 200 V PEAK PULSE POWER: 1500 W FEATURES ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.05 ◇ Excellent clam

SINGLE PHASE 1.0AMP. GLASS PASSIVATED BRIDGE RECTIFIERS

Voltage Range 50 to 1000 Volts Current 1.0 Ampere FEATURES ● UL Recognized File # E-230084 ● Ideal for printed circuit board ● Reliable low cost construction utilizing molded plastic technique ● 250°C/10 seconds / 0.375(9.5mm) lead length at 5 lbs., (2.3kg) tension ● Small size, simp

SINGLE PHASE 1.0 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic technique * High surge current capability * Polarity: marked on body * Mounting position: Any * Weight: 1.0 grams

SINGLE-PHASE BRIDGE RECTIFIER

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES · Glass passivated chip junction · High forward surge current capability · Ideal for printed circuit board · High temperature soldering guaranteed: 260℃/10 seconds at terminals

1.0AMP Single Phase Bridge Rectifiers

FEATURES ● Low forward voltage drop, high current capability ● Rating to 1000V PRV ● Ideal for printed circuit board ● Reliable low cost construction utilizing molded plastic technique results in inexpensive products ● Lead tin Pb / Sn copper ● The plastic material has UL flammability cl

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

Reverse Voltage – 50 to 1000 V Forward Current – 1 A Features • Glass passivated chip junction • Low forward voltage drop • High surge overload rating of 50 A peak • Ideal for printed circuit board

1 Amp single phase glass passivated bridge rectifier 50to1000 volts

Features • Through Hole Package • Glass Passivated Diode Construction • Moisture Resistant Epoxy Case • High Surge Current Capability

1 Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts

Features ● Through Hole Package ● Glass Passivated Diode Construction ● Moisture Resistant Epoxy Case ● High Surge Current Capability

BRIDGE RECTIFIERS 0.8 to 1.5 Amps

BRIDGE RECTIFIERS 0.8 to 1.5 Amps

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:1.0A

VOLTAGE:50 TO 1000V CURRENT:1.0A FEATURE Ideal for printed circuit board Reliable low cost construction utilizing molded plastic Technique Surge overload rating:50 A peak UL recognized file # E-107371

SINGLE-PHASE BRIDGE RECTIFIER

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES · Glass passivated chip junction · High forward surge current capability · Ideal for printed circuit board · High temperature soldering guaranteed: 260℃/10 seconds at terminals

1.0A GLASS PASSIVATED BRIDGE RECTIFIER

Features ● UL Recognized Component ● Ideal for Printed Circuit Board ● Glass Passivated Chip Junctions, Surge Overload Rating of 50A Peak ● Simple, Compact Structure for Trouble-free Performance ● Plastic Package - UL Flammability Classification 94V-0

SINGLE PHASE 1.0 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic technique * High surge current capability * Polarity: marked on body * Mounting position: Any * Weight: 1.0 grams

SINGLE PHASE 1.0 AMP BRIDGE RECTIFIERS

1 Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts

Features • Lead Free Finish/RoHS Compliant(Note 1) (P Suffix designates RoHS Compliant. See ordering information) • 4-PIN DIP Package • Glass Passivated Diode Construction • UL Recognized File # E165989 • High Surge Current Capability • Epoxy meets UL 94 V-0 flammability rating • Moistu

Single Phase 1.0 A Glass Passivated Bridge Rectifiers

[Rectron] FEATURES * Good for automation insertion * Surge overload rating - 40 amperes peak * Ideal for printed circuit board * Reliable low cost construction utilizing molded * Glass passivated device * Polarity symbols molded on body * Mounting position: Any * Weight: 1.0 gram

Single-phase Silicon Bridge Rectifier Reverse Voltage 50 to 1000V Forward Current 1.0 A

Reverse Voltage 50 to 1000V Forward Current 1.0 A Features • High surge current Capability • High tempererature soldering guaranteed: 260℃/10 seconds 260℃/10 seconds • Lead and body according with RoHS standard

TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Good for automation insertion * Surge overload rating - 50 Amperes peak * Ideal for printed circuit board * Reliable low cost construction * Glass passivated junction

SINGLE-PHASE BRIDGE RECTIFIER

FEATURES • Glass passivated chip junction. • High forward surgecurrent capability • Ideal for printed circult noard • High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension

GLASS PASSIVATED BRIDEG RECTIFIERS

Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amps FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Glass passivated chip junction • Rating to 1000V PRV • Ideal for printed circuit board High temperature soldering guaranteed:260 °C/

Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes

FEATURES ◆ Ideal for printed circuit board ◆ Reliable low cost construction technique results in inexpensive product ◆ High temperature soldering guaranteed: 260°C/ 10 seconds / 0.375” ( 9.5mm ) ℃ lead length at 5 lbs., ( 2.3 kg ) tension ◆ UL Recognized File number: E347214

Single Phase 1.0 AMP Glass Passivated Bridge Rectifiers

Features ● Ideal for printed circuit board ● Reliable low cost construction utilizing molded plastic technique ● High temperature soldering guaranteed: 260 oC / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ● Small size, simple installation ● High surge current

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Good for automation insertion * Surge overload rating - 50 amperes peak * Ideal for printed circuit board * Reliable low cost construction utilizing molded * Glass passivated device * Polarity symbols molded on body * Mounting po

SINGLE PHASE 1.0 AMP BRIDGE RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere Glass passivated type FEATURES Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High surge current capability Polarity: marked on body Mounting position: Any Weight: 0.412 g

Ideal for printed circuit board

REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere FEATURES ◆ Plastic material has Underwriters Laboratory Flammability Classification 94V-0. ◆ High surge overload rating of 50 Amperes peak. ◆ Ideal for printed circuit board. ◆ Glass passivated chip junction.

Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier

Reverse Voltage 50 and 1000V Forward Current 1.0A Features ◆ Ideal for printed circuit boards ◆ Applicable for automative insertion ◆ High surge current capability ◆ Solder Dip 260℃，40seconds

SINGLE PHASE 1.0AMP GLASS PASSIVATED BRIDGE RECTIFIER

Features: • Glass passivated die construction • Low forward voltage drop • High current capability • High surge current capability • Plastic material-UL flammability 94V-0

GLASS PASSIVATED BRIDGE RECTIFIER

Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amps FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Glass passivated chip junction • Rating to 1000V PRV • Ideal for printed circuit board High temperature soldering guaranteed:260 °C/

1.0 AMP.DIP GLASS PASSIVATED BRIDGE RECTIFIERS

Features • Glass passivated chip junction • Low forward voltage drop • High surge overload rating of 50 A peak • Ideal for printed circuit board

SILICON BRIDGE RECTIFIERS

VOLTAGE RANGE: 50 --- 1000 V CURRENT: 1.0 A FEATURES ◇ Rating to 1000V PRV ◇ Surge overload rating to 30 Amperes peak ◇ Ideal for printed circuit board ◇ Reliable low cost construction utilizing molded plastic technique results in inexpensive product ◇ Lead solderable per MIL-STD-202 met

Glass Passivated chip junction

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES ＊ Glass Passivated chip junction ＊ High forward surge current capability ＊ Ideal for printed circuit board ＊ High temperature soldering guaranteed: 260°C/10 second at 5 lbs. (2.3kg) tension

SINGLE PHASE 1.0 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic technique * High surge current capability * Polarity: marked on body * Mounting position: Any

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere FEATURES ◆ Plastic material has Underwriters Laboratory Flammability Classification 94V-0. ◆ High surge overload rating of 50 Amperes peak. ◆ Ideal for printed circuit board. ◆ Glass passivated chip junction.

SINGLE PHASE GLASSPASSIVATED BRIDGE RECTIFIERS

Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,5 lbs. (2.3kg) tension

ASEMI Bridge Rectifier

Features The plastic material used carries Underwriters Laboratory flammability recognition 94V-0 Surge overload ratings to 50 amperes High temperature soldering guaranteed 265 C /10 seconds at 5 lbs (2.3kg) tension Ideal for printed circuit board application Component Index, file number SZ

DB101 THRU DB107 SINGLE PHASE 1.0AMP GLASS PASSIVATED BRIDGE RECTIFIER

Features Glass passivated die construction Low forward voltage drop High current capability High surge current capability Plastic material-UL flammability 94V-0 Terminals finish: 100% Pure Tin This is a Pb − Free Device “-HF” suffix is for Halogen Free Device All SMC parts are traceab

1 Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts

Features • Through Hole Package • Glass Passivated Diode Construction • UL Recognized File # E165989 • High Surge Current Capability • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

BRIDGE RECTIFIER

BRIDGE RECTIFIER High surge overload rating of 50A peak

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS

Voltage Range - 50 to 1000 Volts Current - 1.0 Ampere FEATURES The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaran

SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

Features • Glass passivated die construction • Low forward voltage drop • High current capability • High surge current capability • Designed for surface mount application • Plastic material-UL flammability 94V-0

SILICON BRIDGE RECTIFIERS

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere FEATURES ◆ The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ◆ Ideal for printed circuit boards ◆ Low reverse leakage ◆ High forward surge current capability ◆ High temperature soldering g

Bridge Rectifiers

Features ● UL recognition, file #E313149 ● Ideal for automated placement ● High surge current capability ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications General purpose use in AC/DC bridge full wave rectification for SMPS, lighting ballast, adapter,

Bridge Rectifiers

UL recognition, file #E313149 Glass passivated chip junction High surge current capabilty Solder dip 275 °C max. 7 s, per JESD 22-8106

BRIDGE RECTIFIER

REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere FEATURES Glass passivated chip junction Ideal for surface mounted applications Low leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 seconds at terminals

1 Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts

Features • Through Hole Package • Glass Passivated Diode Construction • UL Recognized File # E165989 • High Surge Current Capability • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE-50 to 1000 Volts?

10 AMP SILICON BRIDGE RECTIFIERS

FEATURES ● VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

VOLTAGE 1300 Volts CURRENT 1.0 Ampere SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

FEATURES * Good for automation insertion * Surge overload rating - 40 amperes peak * Ideal for printed circuit board * Reliable low cost construction utilizing molded * Glass passivated device * Polarity symbols molded on body * Mounting position: Any * Weight: 1.0 gram

Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes

FEATURES ◆ Ideal for printed circuit board ◆ Reliable low cost construction technique results in inexpensive product ◆ High temperature soldering guaranteed: 260°C/ 10 seconds / 0.375” ( 9.5mm ) ℃ lead length at 5 lbs., ( 2.3 kg ) tension ◆ UL Recognized File number: E347214