SINGLE-PHASE BRIDGE RECTIFIER

FEATURES • Glass passivated chip junction. • High forward surgecurrent capability • Ideal for printed circult noard • High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension

CATV/MATV/Satellite Splitter (Indoor)

Single & Dual Output Miniature, 1W SIP DC/DC Converters

文件：200.56 Kbytes Page：2 Pages

Digital Output Loop / Bus Powered DIN-Rail Model D1046Y

Features: Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Voltage input with isolated commands, loop powered or bus powered. Suitable for driving 1 or 2 positions directional solenoid valves. Output short circuit proof and current limited. Three port isolation,

Digital Output Loop / Bus Powered DIN-Rail Model D1046Y

Features: Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Voltage input with isolated commands, loop powered or bus powered. Suitable for driving 1 or 2 positions directional solenoid valves. Output short circuit proof and current limited. Three port isolation,

Digital Output Loop / Bus Powered DIN-Rail Model D1046Y

Features: Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Voltage input with isolated commands, loop powered or bus powered. Suitable for driving 1 or 2 positions directional solenoid valves. Output short circuit proof and current limited. Three port isolation,

Silicon NPN Power Transistors

DESCRIPTION • Complement to type 2SB817 • With TO-3PN package APPLICATIONS • Power amplification • Low frequency and audio band

TO-3P Plastic-Encapsulate Transistors

TRANSISTOR (NPN) FEATURES ● Large current capacitance ● Complementary PNP Types:2SB817 APPLICATIONS ● High audio frequency output stage ● Power amplifier

140V/12A AF 60W Output Applications

Features • Capable of being mounted easily because of one point fixing type plastic molded package (Inter changeable with TO-3). • Wide ASO because of on-chip ballast resistance. • Good depenedence of fT on current and excellent high frequency responce. The descriptions in pare

POWER TRANSISTORS(12A,140V,100W)

Silicon NPN transistor in a TO-3P Plastic Package.

Descriptions Silicon NPN transistor in a TO-3P Plastic Package. Features For 60W audio frequency amplifier output stage, Complementary to 2SB817. Applications Designed for use in audio frequency amplifier.

Power supply

Description The device is a NPN transistor manufactured using new BiT-LA (Bipolar transistor for linear amplifier) technology. The resulting transistor shows good gain linearity behaviour. Features ■ High breakdown voltage VCEO = 140 V ■ Typical ft = 20 MHz ■ Fully characterized at 125 °C Ap

Silicon NPN Power Transistors

DESCRIPTION • Complement to type 2SB817 • With TO-3PN package APPLICATIONS • Power amplification • Low frequency and audio band

Complementary Silicon Power Ttransistors

DESCRIPTION It is intented for use in power ampli fier and swi tchi ng appl ications.

NPN PLANAR SILICON TRANSISTOR(AUDIO POWER AMPLIFIER DC TO DC CONVERTER)

AUDIO POWER AMPLIFIER DC TO DC CONVERTER ● High Current Capability ● High Power Dissipation ● Complementary to 2SB817

RF Power LDMOS Transistor

140V / 12A, AF 80W Output Applications

Features • Large current capacitance. • Wide ASO and high durability against breakdown. • Adoption of MBIT process.

Silicon NPN Power Transistor

DESCRIPTION • Collector-Emitter Breakdown Voltage- : V(BR)CEO= 140V(Min) • Good Linearity of hFE • High Current Capability • Wide Area of Safe Operation • Complement to Type 2SB817E • Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS

SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Model D1048S

Features: SIL 3 according to IEC 61508:2010 Ed. 2 for lifetime = 20 years. PFDavg (1 year) 0.00 E+00, SFF 100 . SIL 3 Systematic capability Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Loop powered for NE loads. Short and open circuit line diagnostic monitor

SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Model D1048S

Features: SIL 3 according to IEC 61508:2010 Ed. 2 for lifetime = 20 years. PFDavg (1 year) 0.00 E+00, SFF 100 . SIL 3 Systematic capability Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Loop powered for NE loads. Short and open circuit line diagnostic monitor

SIL 3 Digital Output Driver, NE Loads Bus Powered, DIN-Rail Model D1049S

Features: SIL 3 according to IEC 61508:2010 Ed. 2 for Tproof = 12 / 20 yrs (≤10 / >10 of total SIF). PFDavg (1 year) 8.32 E-06, SFF 98.90 . SIL 3 Systematic capability. Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Bus powered for NE loads. Short and open cir

SIL 3 Digital Output Driver, NE Loads Bus Powered, DIN-Rail Model D1049S

Features: SIL 3 according to IEC 61508:2010 Ed. 2 for Tproof = 12 / 20 yrs (≤10 / >10 of total SIF). PFDavg (1 year) 8.32 E-06, SFF 98.90 . SIL 3 Systematic capability. Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Bus powered for NE loads. Short and open cir

SIL 3 Digital Output Driver, NE Loads Bus Powered, DIN-Rail Model D1049S

Features: SIL 3 according to IEC 61508:2010 Ed. 2 for Tproof = 12 / 20 yrs (≤10 / >10 of total SIF). PFDavg (1 year) 8.32 E-06, SFF 98.90 . SIL 3 Systematic capability. Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Bus powered for NE loads. Short and open cir

Low Cost, 1W SIP Single & Dual Output DC/DC Converters

Low Cost, 1W SIP Single & Dual Output DC/DC Converters Key Features: •1W Output Power •Miniature SIP Case •UL Approved (File E245422) •Single & Dual Outputs •1,000 VDC Isolation •>3.5 MHour MTBF •24 Standard Models • LOWEST COST!!

Very Low Cost, 1W SIP Dual Isolated Output DC/DC Converters

Very Low Cost, 1W SIP Dual Isolated Output DC/DC Converters Key Features: •1W Output Power •Miniature SIP Case •UL Approved (File E245422) •Dual Isolated Outputs •1,000 VDC Isolation •>3.5 MHour MTBF •12 Standard Models •Industry Standard Pin-Out • LOWEST COST!!

Low Cost, Miniature SIP 1W, Very High Isolation DC/DC Converters

Low Cost, Miniature SIP 1W, Very High Isolation DC/DC Converters Key Features: •1W Output Power •6,000 VDC Isolation •7 Pin SIP Case •5V and 12V Inputs •Single & Dual Outputs •16 Standard Models •3.5 MH MTBF • LOWEST COST!!

Low Cost, 1W SIP High Isolation DC/DC Converters

Low Cost, 1W High Isolation SIP DC/DC Converters Key Features: ● 1W Output Power ● 3,000 VDC Isolation ● Miniature SIP Case ● Single & Dual Outputs ● >1 MHour MTBF ● 24 Standard Models ● LOWEST COST!!

Low Cost, 1W High Isolation SIP DC/DC Converters

[MPD] Low Cost, 1W High Isolation SIP DC/DC Converters Key Features: ● 1W Output Power ● 3,000 VDC Isolation ● Miniature SIP Case ● Single & Dual Outputs ● >1 MHour MTBF ● 24 Standard Models ● LOWEST COST!!

Low Cost, 1W SIP Tightly Regulated DC/DC Con vert ers

Low Cost, 1W SIP Tightly Regulated DC/DC Converters Key Features: •1W Output Power •Tightly Regulated •Single & Dual Outputs •Miniature SIP Case •1,000 VDC Isolation •>3.5 MHour MTBF •24 Standard Models •Industry Standard Pin-Out •LOWEST COST!!

Low Cost, Miniature 1W SIP, Wide Input DC/DC Converters

Low Cost, Miniature 1W SIP, Wide Input DC/DC Converters Key Features: •1W Output Power •2:1 Input Voltage Range •1,500 VDC Isolation •Short Circuit Protected •Miniature SIP Case •Single & Dual Outputs •1.0 MH MTBF •Industry Standard Pin-Out • Low Low Cost!!

包装：袋 描述：BACKSHELL 连接器，互连器件 D-Sub，D 形连接器底壳，罩

包装：袋 描述：BACKSHELL 连接器，互连器件 D-Sub，D 形连接器底壳，罩

Combiners

Gold metallised multi-purpose silicon DMOS RF FET

METAL GATE RF SILICON FET

文件：166.74 Kbytes Page：5 Pages

Digital Output Loop / Bus Powered DIN-Rail Model D1045Y

文件：368.84 Kbytes Page：4 Pages

Digital Output Loop / Bus Powered DIN-Rail Model D1045Y

文件：368.84 Kbytes Page：4 Pages

Digital Output Loop / Bus Powered DIN-Rail Model D1045Y

文件：368.84 Kbytes Page：4 Pages

Fixed Inductors for Surface Mounting

文件：94.8 Kbytes Page：1 Pages

Miniature, 1W SIP Dual Isolated Output DC/DC Con vert ers

文件：141.09 Kbytes Page：2 Pages

High Isolation Miniature, 1W SIP DC/DC Converters

文件：201.36 Kbytes Page：2 Pages

Fixed Inductors for Surface Mounting

文件：74.18 Kbytes Page：1 Pages

Tightly Regulated Miniature, 1W SIP DC/DC Converters

文件：233.89 Kbytes Page：2 Pages

Miniature, 1W SIP Ultra-High Isolation DC/DC Converters

文件：193.92 Kbytes Page：2 Pages

0.1/2.5 GHz Si MMIC BUFFER AMPLIFIERS

DESCRIPTION The STB7102, STB7103 and STB7104 designed for Mobile Phone applications (0.1/2.5GHz), are an high isolation Si MMIC Buffer Amplifiers. Manufactured in the third generation of ST proprietary bipolar process, they offers an excellent isolation and a good linearity using a low current co

Customer Specification

Construction Diameters (In) 1) Component 1 3 X 1 COND a) Conductor 22 (26/36) AWG Bare Copper 0.027 b) Insulation 0.011 Wall, Nom. PVC, Semi Rigid 0.049 (1) Color(s) Cond Color Cond Color Cond Color 1 BROWN 2 BLUE 3 BLACK 2) Cable Assembly 3 Components Cabled a) Twists: 8.0 Twists/foot (m

Customer Specification

Construction Diameters (In) 1) Component 1 3 X 1 COND a) Conductor 22 (26/36) AWG Bare Copper 0.027 b) Insulation 0.011 Wall, Nom. PVC, Semi Rigid 0.049 (1) Color(s) Cond Color Cond Color Cond Color 1 BROWN 2 BLUE 3 BLACK 2) Cable Assembly 3 Components Cabled a) Twists: 8.0 Twists/foot (m

104/204 In-Line Threaded Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging; ideal for viscous media, slurries and emulsions „ Large 21/2˝ diaphragm compatib

Smooth, high torque, roller ratchet handle

文件：254.3 Kbytes Page：3 Pages