Power Amplifier for PHS

Description The CXG1030N is a power amplifier for PHS. This IC is designed using the Sony’s GaAs J-FET process and operates at a single power supply. Features • Output power 21 dBm • Positive power supply 3.0 V • Low current consumption 170 mA • High power gain 39 dB Typ. • Small mold packa

Power Amplifier for PHS

USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi

RTL8192cu Chipset Antenna Length: 150mm / 5.9 Sticks out 48mm (1.9) beyond USB port Weight: 6g Wireless Standards: IEEE 802.11n (draft), IEEE 802.11g, IEEE 802.11b Host Interface: High speed USB2.0/1.1 interface Data Rate: 802.11n: up to 150Mbps (downlink) and up to 150Mbps (uplink) , 802.11

Si-100 Motor Control

Features • Programmable for stand alone operation with Applied Motion’s easy to use Si Programmer™ Windows software (software and programming cable included) • Can be operated in real time from a host PC or PLC using Applied Motion’s Si Command Language ™ (SCL) • Can be networked with all

Heyco-Flex™Mounting Brackets

文件：102.49 Kbytes Page：1 Pages

Heyco-Flex?줞ounting Brackets

文件：103.47 Kbytes Page：1 Pages

16 AWG pairs stranded (7x24) bare copper conductors, twisted pairs, overall Beldfoil shield

文件：104.47 Kbytes Page：3 Pages