3.3 V Stereo Audio DAC with 2 VRMS Line Output

Description The CS4353 is a complete stereo digital-to-analog system including digital interpolation, fifth-order multi-bit delta-sigma digital-to-analog conversion, digital de-emphasis, analog filtering, and on-chip 2 VRMS line-level driver from a 3.3 V supply. Features ♦ Multi-bit Delta-Sigma

96kHz 24BIT DAC WITH DIT

GENERAL DESCRIPTION The AK4353 is a stereo CMOS D/A Converter and Digital Audio Interface Transmitter. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The AK4353 can operate at the power supply from 2.7V to 5

96kHz 24BIT DAC WITH DIT

GENERAL DESCRIPTION The AK4353 is a stereo CMOS D/A Converter and Digital Audio Interface Transmitter. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The AK4353 can operate at the power supply from 2.7V to 5

EVALUATION BOARD REV.A FOR AK4353

GENERAL DESCRIPTION The AK4353 is a stereo CMOS D/A Converter and Digital Audio Interface Transmitter. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The AK4353 can operate at the power supply from 2.7V to 5

Panel Mount Lenses for T-1 (3mm) LEDs

文件：79.98 Kbytes Page：1 Pages

Adafruit Perma Proto 40 Pin Raspberry Pi Half Size PCB Kit - with 2x20 Header

文件：2.08775 Mbytes Page：3 Pages