Voltage-Controlled Oscillator Surface Mount Module

文件：94.26 Kbytes Page：2 Pages

Voltage-Controlled Oscillator Surface Mount Module

文件：112.3 Kbytes Page：2 Pages

VCO (voltage controlled oscillator)

Voltage-Controlled Oscillator Surface Mount Module

文件：112.3 Kbytes Page：2 Pages

S/H and AGC for CCD Camera

Description The CXA1390AQ/AR are CCD cameras signal processing ICs which extract signals from the CCD output. These bipolar ICs perform correlated double sampling. AGC, color separation, high luminance detection and others. Additionary, these ICs are not affected by irregular pulses which occure

S/H and AGC for CCD Camera

Description The CXA1390AQ/AR are CCD cameras signal processing ICs which extract signals from the CCD output. These bipolar ICs perform correlated double sampling. AGC, color separation, high luminance detection and others. Additionary, these ICs are not affected by irregular pulses which occure

4-bit Microcontroller

General Description The HTG1390 is the processor from Holtek’s 4-bit stand alone single chip microcontroller range specifically designed for LCD product applications. The device is ideally suited for multiple LCD low power applications among which are calculators, scales, and hand held LCD produc

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: • High Gain: 51dB Typ., HIgh Power Output: 12W Typ. • Low Number of External Components Required • Low Noise During Power ON/OFF Operation • Soft Tonal Quality in Saturated Power Output • Low Distortion Over Low to High Audio Frequency Range • Low Residual Noise: Rg = 0

RF & MICROWAVE TRANSISTORS UHF BASE STATION APPLICATIONS

DESCRIPTION The SD1390 is a gold metallized NPN planar transistor using diffused emitter ballast resistors for reliability and ruggedness. The SD1390 is specifically designed as a low power, high gain driver and can be operated in Class A, B or C. ■ 470 MHZ ■ 24 VOLTS ■ POUT = 1.5 W WITH 13.0