Creating a Constant Envelope Signal Using the ADL5331 RFVGA and AD8319 Log Detector

文件：270.68 Kbytes Page：4 Pages

Creating a Constant Envelope Signal Using the ADL5331 RFVGA and AD8319 Log Detector

Inductive Sensors

Basic features Approval/Conformity CE UKCA cULus EAC WEEE Basic standard IEC 60947-5-2 Trademark Global

PUSH-IN fittings, metric

Technical features Medium: Compressed air Operating pressure: 10 bar (145 psi) max. Vacuum: 750 mm of Hg Thread sizes: M5, M6, 1/8, 1/4, 3/8 and 1/2 ISO G, ISO Rc and ISO R Ambient/Media temperature: -20°C ... +60°C ( -4 ... 140°F) Tube sizes: 4, 6, 8, 10, 12, 16 mm Tubing types: PA

Remote Type 8-Bit MCU

General Description The HT48RA0-3/HT48CA0-3 are 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. The mask version HT48CA0-3 is fully pin and functionally compatible with the OTP version HT48RA0-3 device. Featur

Quad Power Drivers with Serial Diagnostic Interface

Description The HIP0082 and HIP0084 Quad Power Drivers contain four individually protected NDMOS transistor switches to drive inductive and resistive loads such as: fuel injectors, relays, solenoids, etc. The outputs are low-side switches driven by active-low CMOS logic inputs. Each output is pro