LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

GENERAL DESCRIPTION The CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully co

LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

GENERAL DESCRIPTION The CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully co

LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

GENERAL DESCRIPTION\nThe CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully compil Pin to pin compatible with ML4800 and FAN4800\nAdditional folded-back current limit for PWM section.\n23V Bi-CMOS process\nVIN OK turn on PWM at 2.5V instead of 1.5V \nInternally synchronized leading edge PFC and trailing edge PWM in one IC\nSlew rate enhanced transconductance error amplifier for ul;

LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

GENERAL DESCRIPTION The CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully co

Fluorescent display tube level meter driver, 16-point x 2 channel, VU scale, bar display

The BA6800AF is a two-channel, 16-point fluorescent display tube driver for VU-scale bar-level meters. It uses a dynamic-drive system and is provided with both AC and DC inputs. The AC input mode has a peak hold circuit. The IC features a power-on mute, and the output block can directly drive fl

10-bit bus switch with precharged outputs for live insertion

DESCRIPTION The CBT6800 provides ten bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows bi-directional connections to be made while adding near-zero propagation delay. The device also precharges the B port to a user-selectable bias voltage (BIASV)

16-Bit Microprocessor With 8-Bit Data Bus

OVERVIEW This manual includes hardware details and programming information for the MC68000, the MC68HC000, the MC68HC001, the MC68008, the MC68010, and the MC68EC000. For ease of reading, the name M68000 MPUs will be used when referring to all processors. Refer to M68000PM/AD, M68000 Programmers

subminiature t-3/4 5-volt resistor lamps

文件：211.45 Kbytes Page：2 Pages

Video modulator circuit

文件：54.87 Kbytes Page：10 Pages