PDM Input Class D Audio Power Amplifier

This is a digital pulse-density modulated (PDM) input Class D power amplifier with Class AB audio performance and Class D efficiency.\nActive emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI.\nA filterless spread-sp • Single-Supply Operation (2.5V to 5.5V) \n• 1mA Quiescent Current \n• 29uV VRMS Output Noise (AV = 6dB) \n• Exceptionally High Jitter Tolerance \n• Supports Left, Right, or Left/2 + Right/2 Outputs \n• 77dB PSRR at 217Hz \n• Robust Short-Circuit and Thermal Protection;

Voice Recording & Playback Device 16 Minute Duration

General Description : The APR6016 offers non-volatile storage of voice and/or data in advanced Multi-Level Flash memory. Up to 16 minutes of audio recording and playback can be accommodated. A maximum of 30K bits of digital data can be stored. APR6016 devices can be cascaded for longer duration

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga

5.3 KV TRIOS OPTOCOUPLER HIGH RELIABILITY

5.3 kV TRIOS OPTOCOUPLER HIGH RELIABILITY

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free