18-31GHz Low Noise Amplifier

Description The circuit is a three-stage self biased wide band monolithic low noise amplifier. The circuit is manufactured with a standard HEMT process : 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Main Features • Broad band performance

18-31GHz Low Noise Amplifier

18-31GHz Low Noise Amplifier

Description The circuit is a three-stage self biased wide band monolithic low noise amplifier. The circuit is manufactured with a standard HEMT process : 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Main Features • Broad band performance

18-31GHz Low Noise Amplifier

Description The circuit is a three-stage self biased wide band monolithic low noise amplifier. The circuit is manufactured with a standard HEMT process : 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Main Features • Broad band performance

18-30GHz Low Noise Amplifier

Description The CHA2069-QDG is a three-stage selfbiased wide band monolithic low noise amplifier. Typical applications range from telecommunication (point to point, point to multipoint, VSAT) to ISM and military markets. Main Features ■ Broadband performance 18-30GHz ■ 3dB noise figure ■ 20dB

18-31GHz Low Noise Amplifier

Description The monolithic microwave IC (MMIC) in the package is a three-stage self biased wide band monolithic low noise amplifier. The MMIC is manufactured with a standard PM-HEMT process: 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Mai

18-31GHz Low Noise Amplifier

Description The monolithic microwave IC (MMIC) in the package is a three-stage self biased wide band monolithic low noise amplifier. The MMIC is manufactured with a standard PM-HEMT process: 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Mai

18-31GHz Low Noise Amplifier

Description The monolithic microwave IC (MMIC) in the package is a three-stage self biased wide band monolithic low noise amplifier. The MMIC is manufactured with a standard PM-HEMT process: 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. Mai

18-31GHz Low Noise Amplifier

文件：261.24 Kbytes Page：8 Pages

18-31GHz Low Noise Amplifier

文件：261.24 Kbytes Page：8 Pages

16-32GHz Low Noise Amplifier

文件：383.61 Kbytes Page：10 Pages

16-32GHz Low Noise Amplifier

16-32GHz Low Noise Amplifier

文件：383.61 Kbytes Page：10 Pages

16-32GHz Low Noise Amplifier

S2-Compatible 7-Input 3-Output Audio/Video Switch

Description The CXA2069Q is a 7-input, 3-output audio/video switch featuring I2C bus compatibility for TVs. This IC has input pins that are compatible with S2 protocol. Features • 4 inputs that are compatible with S2 protocol • Serial control with I2C bus • 7 inputs, 3 outputs

80 V - 1.5 A QUAD DARLINGTON SWITCHES

DESCRIPTION Designed to interface logic to a wide variety of high current, high voltageloads,thesedevices eachcontain four NPN darlington switches delivering up to 1.5 A with a specified minimum breakdown of 80 V and a sustaining voltage of 50 V. ■ OUTPUT CURRENT TO 1.5 A EACH DARLINGTON ■ MIN

QUAD 1.5 A DARLINGTON SWITCHES

FEATURES ■ TTL, DTL, MOS, CMOS Compatible Inputs ■ Transient-Protected Outputs ■ Loads to 480 Watts ■ Heat-Sink Contact Tabs ■ Automotive Capable

1.25 A QUAD DARLINGTON SWITCHES

1.25 A QUAD DARLINGTON SWITCHES