192 kHz STEREO DAC WITH 2 Vrms LINE OUT

Description The CS4351 is a complete stereo digital-to-analog system including digital interpolation, fifth-order multi-bit delta-sigma digital-to-analog conversion, digital de-emphasis, volume control, channel mixing, analog filtering, and on-chip 2 Vrms line-level driver. The advantages of this

192 kHz Stereo DAC with 2 Vrms Line Out

文件：807.83 Kbytes Page：37 Pages

包装：散装 描述：BOARD EVAL FOR CS4351 DAC 开发板，套件，编程器 评估板 - 数模转换器（DAC）

EVALUATION BOARD REV.B FOR AK4351

GENERAL DESCRIPTION The AK4351 is a high cost performance 18bit stereo DAC for low-end digital audio systems. The modulator in the AK4351 uses the new developed Advanced Multi Bit architecture with wide dynamic range. The analog outputs are filtered in the analog domain by a combination of SCF an

POWER TRANSISTORS(16A,100-160V,125W)

16A COMPLEMENTARY SILICON POWER TRANSiSTORS 100 - 160 VOLTS 125 WATTS MJE4340 MJE4341 MJE4342 --> NPN MJE4343 MJE4350 MJE4351 MJE4352 --> PNP MJE4353

COMBINED E1/T1 TRANSCEIVER

FEATURES • Monolithic device which integrates software selectable full-featured T1 and E1 framers and T1 and E1 short haul and long haul line interfaces. • Meets or exceeds T1 and E1 shorthaul and longhaul network access specifications including ANSI T1.102, T1.403, T1.408, AT&T TR 62411, IT

COMBINED E1/T1 TRANSCEIVER

FEATURES • Monolithic device which integrates software selectable full-featured T1 and E1 framers and T1 and E1 short haul and long haul line interfaces. • Meets or exceeds T1 and E1 shorthaul and longhaul network access specifications including ANSI T1.102, T1.403, T1.408, AT&T TR 62411, IT

COMBINED E1/T1 TRANSCEIVER

FEATURES • Monolithic device which integrates software selectable full-featured T1 and E1 framers and T1 and E1 short haul and long haul line interfaces. • Meets or exceeds T1 and E1 shorthaul and longhaul network access specifications including ANSI T1.102, T1.403, T1.408, AT&T TR 62411, IT