PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)

PWM Power Unit The device allows continuous power control for lamps,LEDs or inductive loads. • Highside switch • Overtemperatur protection • Short circuit / overload protection through pulse width reduction and overload shutdown • Load dump protection • Undervoltage and overvoltage shutdown

PWM Power Unit

PWM Power Unit The device allows continuous power control for lamps,LEDs or inductive loads. ● Highside switch (Bootstrap) ● Overtemperatur protection ● Short circuit / overload protection through pulse width reduction and overload shutdown ● Load dump protection ● Undervoltage and overvolta

汽车级智能高边开关 | PROFET™

The device is monolithically integrated in Smart SIPMOS technology. The power transistor is built by N-channel-planar power MOSFET. The inputs are ground referenced CMOS compatible. • Low standby current\n• Automatic run generation\n• Improved electromagnetic compatibility (EMC)\n• Stable behaviour at undervoltage\n• Short-circuit protection\n• Overload protection\n• Load Dump protection\n• Overtemperature protection\n• Loss of ground protection\n• Reverse battery protection\n•;

Smart High-Side Power Switch

文件：187.57 Kbytes Page：10 Pages

Smart High-Side Power Switch

文件：187.57 Kbytes Page：10 Pages

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：管件 描述：IC PWR SWITCH N-CHAN 1:1 DSO-20 集成电路（IC） 配电开关，负载驱动器

PowerMOS transistor Avalanche energy rated

GENERAL DESCRIPTION N-channel, enhancement mode field-effect power transistor, intended for use in off-line switched mode power supplies, T.V. and computer monitor power supplies, d.c. to d.c. converters, motorcontrol circuits and general purpose switching applications. The IRF730 is supplied in

N - CHANNEL 400V - 0.75 ohm - 5.5A - TO-220 PowerMESH] MOSFET

Description The PowerMESH™II is the evolution of the first generation of MESH OVERLAY™. The layout refinements introduced greatly improve the Ron*area figure of merit while keeping the device at the leading edge for what concerns swithing speed, gate charge and ruggedness. General features

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec