CMOS型低压差线性稳压器(CMOS Type LDO Linear Regulator)

BL8063G series is a group of positive voltage output, low power consumption, low dropout voltage regulator.\n\nBL8063G can provide output value in the range of 1.0V~3.6V every 0.1V step. It also can be customized on command.\n\nBL8063G includes high accuracy voltage reference, error amplifier, curre • Low power consumption: 60μA (Typ.)\n• Standby mode: 0.1μA\n• Low dropout voltage: 65mV @100mA @VOUT=3.3V (Typ.)\n• High PSRR: 70dB@1KHz (Typ.)\n• Low temperature coefficient: ±100ppm/C\n• Excellent line regulation: 0.05%/V\n• Output voltage range: 1.0V~3.6V\n• Highly accurate: ±2%\n• Buil;

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

4CH HIGH SIDE DRIVER

4CH HIGH SIDE DRIVER TA8063F is built into for 0.5A High-side driver ICs which drive lamp, relay, and solenoid actuators. Inputs from DI1, DI2, DI3, and DI4 switch ON and OFF modes. Inputs are TTL-compatible, thus the device can also be directly controlled from a CPU or other control system. The