Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

低成本、300 MHz轨到轨放大器（单路带禁用特性）

AD8061/AD8062/AD8063均为轨到轨输出电压反馈型放大器，易于使用且成本低廉。这些放大器拥有一般电流反馈型放大器的带宽和压摆率，还具有宽输入共模电压范围和输出电压摆幅，因此易于使用，可采用低至2.7 V的单电源供电。\n\n 尽管AD8061/AD8062/AD8063成本很低，但仍能提供出色的整体性能。对于视频应用，驱动150Ω负载的差分增益和相位误差分别为0.01%和0.04°，0.1 dB增益平坦度为30 MHz。此外，这些放大器还具有300 MHz的宽带宽，压摆率为650 V/µs。\n\n AD8061/AD8062/AD8063的典型功耗为 • 低成本\n\n• 单路(AD8061)、双路(AD8062)\n\n• 单路带禁用特性(AD8063)\n\n• 低失调电压： 6 mV \n\n• 高速\n-3 dB带宽：300 MHz (G = 1)\n压摆率：650 V/µs\n8.5 nV/ √Hz(5 V)\n0.1%建立时间：35 ns（1 V步进） \n\n• 采用2.7 V至8 V电源供电\n输入电压范围：−0.2 V至+3.2 V (Vs = 5 V) \n\n• 出色的视频特性（RL = 150 Ω，G = 2）\n增益平坦度： 0.1 dB至30 MHz\n差分增益误差：0.01%\n差分相位误差：0;

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

丝印代码：HHA；Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

丝印代码：HHA；Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

丝印代码：H0E；Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

丝印代码：H0E；Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

丝印代码：H0E；Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：393.77 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

包装：盒 描述：BOARD EVAL FOR AD8063AR 开发板，套件，编程器 评估板 - 运算放大器

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

包装：盒 描述：BOARD EVAL FOR AD8063ART 开发板，套件，编程器 评估板 - 运算放大器

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes Page：20 Pages

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes Page：20 Pages

4CH HIGH SIDE DRIVER

4CH HIGH SIDE DRIVER TA8063F is built into for 0.5A High-side driver ICs which drive lamp, relay, and solenoid actuators. Inputs from DI1, DI2, DI3, and DI4 switch ON and OFF modes. Inputs are TTL-compatible, thus the device can also be directly controlled from a CPU or other control system. The