Relay Driver

BL8023D is a bi-direction relay driver circuit, used to control the magnetic latching relay, with large output capability, ultra-low power consumption. It can be widely used in smart meters and other pulses, level control applications.\nBL8023D can provide 300mA typical driving current, which will d 5 to 36V input voltage range\n\nLow Power Consumption (IQ<1uA)\n\nInput High Level Threshold: 3V, compatible with most single chip microcontroller\n\nTypical Driving Current: 300mA\n\nRds(on)=15ohm(Vin=12V, PMOSFET+NMOSFET)\n\nRds(on)=10ohm(Vin=20V, PMOSFET+NMOSFET;

磁保持继电器驱动：300mA,继电器,驱动

BL8023D是一款磁保持继电器专用驱动芯片，具有驱动电流大，静态功耗小的特点，可用于智能电表或其他脉冲电平转换等领域 • 工作电压5～36V\n• 低功耗(IQ<1uA)\n• 输入高低转换电平3V\n• 典型驱动电流: 300mA\n• Rds(on)=15ohm(Vin=12V, PMOSFET+NMOSFET)\n• Rds(on)=10ohm(Vin=20V, PMOSFET+NMOSFET)\n• 最大驱动电流: 500mA@Vin=24V\n• SOT23-6封装;

300mA Bi-Direction Relay Driver

文件：660.4 Kbytes Page：5 Pages

300mA Bi-Direction Relay Driver

文件：467.72 Kbytes Page：6 Pages

300mA Bi-Direction Relay Driver

文件：660.4 Kbytes Page：5 Pages

300mA Bi-Direction Relay Driver

文件：660.4 Kbytes Page：5 Pages

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

SWITCHING VOLTAGE REGULATOR

[SANKEN]

Separate Excitation Switching Type

文件：59.74 Kbytes Page：5 Pages