RS-485接口电路,MBUS接口电路：

BL3085是一款5V供电、半双工的RS-485收发器。使用限摆率驱动器，能显著减小EMI和由于不恰当的终端匹配电缆所引起的反射，并实现高达500kbps的无差错数据传输。芯片内置失效保护电路，保证接收器输入端在开路或短路时，接收器的输出端处于逻辑高电平的状态。 ·工作电压5V\n·集成一路驱动器和一路接收器\n·具有失效保护功能\n·最高500kbps传输速率\n·收发端具有18KV防静电能力;

具有失效保护功能(Fail-Safe)、低功耗、限摆率的 RS-485 收发器

BL3085(I47)是一款半双工的RS-485收发器，芯片内部包含一路驱动器和一路接收器。BL3085(I47)使用限摆率驱动器，能显著减小EMI和由于不恰当的终端匹配电缆所引起的反射，并实现高达500kbps的无差错数据传输。BL3085(I47)内置失效保护电路，保证接收器输入端在开路或短路时，接收器的输出端处于逻辑高电平状态。 • 内置失效保护电路\n• 高达500kbps的传输速率\n• 总线允许挂接多达256个收发器\n• I/O引脚ESD保护：±15kV IEC 61000-4-2，接触放电\n• SOP8封装\n• ;

接口电路

BL3085A(H)是一款半双工的RS-485收发器，芯片内部包含一路驱动器和一路接收器。BL3085A(H)使用限摆率驱动器，能显著减小EMI和由于不恰当的终端匹配电缆所引起的反射，并实现高达250kbps的无差错数据传输。BL3085A(H)内置失效保护电路，保证接收器输入端在开路或短路时，接收器的输出端处于逻辑高电平状态。BL3085A(H)接收器输入阻抗为1/8单位负载，允许多达256个收发器挂接在总线上，实现半双工通信。 • +3.3V或+5V工作电压\n• 内置失效保护电路\n• 高达250kbps的传输速率\n• 总线允许挂接多达256个收发器\n• I/O引脚ESD保护：±15kV IEC 61000-4-2，接触放电\n• SOP8封装;

High ESD-Protected, Fail-Safe, Slew-Rate-Limited

文件：728.94 Kbytes Page：8 Pages

High ESD-Protected, Fail-Safe, Slew-Rate-Limited

文件：218.45 Kbytes Page：8 Pages

communication that contain one driver and one receiver

文件：669.95 Kbytes Page：9 Pages

All Band TV Tuner IC with On-chip PLL

Description The CXA3250AN is a monolithic TV tuner IC which integrates local oscillator and mixer circuits for VHF band, local oscillator and mixer circuits for UHF band, an IF amplifier and a tuning PLL onto a single chip, enabling further miniaturization of the tuner. Features • Super

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Optoisolator Photon Coupled Bilateral Analog FET

Description: The NTE3085 consists of a gallium arsenide infrared emitting diode coupled to a symmetrical silicon photo detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion–free control of low AC and DC analog signals.