N-Channel Dual Gate MOS-Fieldeffect Tetrode - Depletion Mode

Features: * Integrated Gate protection diodes * High AGC-range * High cross modulation performance * Low feedback capacitance * Low noise figure * Low input capacitance

SILICON N-CHANNEL DUAL GATE MOS-FET

文件：268.6 Kbytes Page：3 Pages

N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode

Applications Input- and mixer stages especially UHF-tuners. Features Integrated gate protection diodes High cross modulation performance Low noise figure High AGC-range Low feedback capacitance Low input capacitance

N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode

Applications Input- and mixer stages especially UHF-tuners. Features Integrated gate protection diodes High cross modulation performance Low noise figure High AGC-range Low feedback capacitance Low input capacitance

N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode

Applications Input- and mixer stages especially UHF-tuners. Features Integrated gate protection diodes High cross modulation performance Low noise figure High AGC-range Low feedback capacitance Low input capacitance

N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode

N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode

0.5 WATT CAPABILITY WITH PROPER HEAT SINKING

• 1N962B THRU 1N986B AVAILABLE IN JANHC AND JANKC PER MIL-PRF-19500/117 • ZENER DIODE CHIPS • 0.5 WATT CAPABILITY WITH PROPER HEAT SINKING • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW

ZENER DIODES

• 1N962BUR-1 thru 1N986BUR-1 AVAILABLE IN JAN,JANTX AND JANTXV PER MIL-PRF-19500/117 • ZENER DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • METALLURGICALLY BONDED

Single/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators

General Description The MAX965–MAX970 single/dual/quad micropower comparators feature Rail-to-Rail®inputs and outputs, and fully specified single-supply operation down to +1.6V. These devices draw less than 5µA per comparator and have open-drain outputs that can be pulled beyond VCC to 6V (max) a

Single/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators

General Description The MAX965–MAX970 single/dual/quad micropower comparators feature Rail-to-Rail®inputs and outputs, and fully specified single-supply operation down to +1.6V. These devices draw less than 5µA per comparator and have open-drain outputs that can be pulled beyond VCC to 6V (max) a

Integrated Circuit 3-Terminal Positive Voltage Regulator, 12V

The NTE966 fixed–voltage regulator is a monolithic integrated circuit in a TO220 type package designed for use in a wide variety of applications including local, on–card regulation. This regulator employs internal current limiting, thermal shutdown, and safe–area compensation. With adequate heat s