Silicon PIN Diode

Preliminary Data ● RF switch, RF attenuator for frequencies above 10 MHz ● Very low IM distortion

Silicon PIN Diode

Features ● RF switch, RF attenuator for frequencies above 10 MHz ● Very low IM distortion

4-channel BTL driver for CD players and CD-ROMs

The BA5970FP is a 4-channel BTL driver developed to drive CD player motors and actuators. The driver input stage contains an operational amplifier, supports a variety of input formats, and allows simple configuration of a filter. ● Features 1) 4-channel BTL driver. 2) Wide dynamic range (4V whe

BTL driver for CD-ROMs

The BA5972FP is a 4-channel BTL driver developed for use with CD-ROMs. A multi-purpose operational amplifier is equipped in each channel to allow use in a variety of applications. Also, by applying independent power supplies for both the pre-stage and power-stage, with the power-stage power supply

BTL driver for CD-ROMs

The BA5972FP is a 4-channel BTL driver developed for use with CD-ROMs. A multi-purpose operational amplifier is equipped in each channel to allow use in a variety of applications. Also, by applying independent power supplies for both the pre-stage and power-stage, with the power-stage power supply

3-channel BTL driver for CD, CD-ROM, DVD, and DVD-ROM

The BA5973FP is a 3-channel BTL driver developed for use as the actuator and loading motor driver for CD and DVD players. Since the gain and frequency characteristics for the actuator can be set to any desired value with external components, it is can be used in a wide range of applications. ● Fe

3-channel BTL driver for CD, CD-ROM, DVD, and DVD-ROM

The BA5973FP is a 3-channel BTL driver developed for use as the actuator and loading motor driver for CD and DVD players. Since the gain and frequency characteristics for the actuator can be set to any desired value with external components, it is can be used in a wide range of applications. ● Fe

BA5974FP

BA5974FP is a 4-channel BTL driver developed for driving a motor for CD players and actuators. PWM output of the digital servo LSI can be directly connected with 3ch other than the spindle without external attachment. (Built-in primary filter) Features 1) 4 ch BTL driver. 2) Since the HSOP 2

4ch BTL driver for CD player

Application CD / MD Features 1) 4chBTL driver. 2) 3ch is a PWM input direct connection type (built-in primary filter) and the filter constant can be changed with an external RC. 3) Wide dynamic range. (5.6V (Typ.) when PreVCC=8V, PowVCC=8V, RL=8Ω) 4) Built-in thermal shutdown circuit. 5)

封装/外壳：28-SOP（0.295"，7.50mm 宽）+ 2 热凸片 包装：卷带（TR） 描述：IC BRIDGE DRIVER PAR 28HSOP 集成电路（IC） 全半桥驱动器

4ch BTL driver for CD player

文件：141.34 Kbytes Page：12 Pages

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

High Voltage Transistor

Features ● SOT23 PNP silicon planar

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

Tantamount짰 Multi-Anode, Surface-Mount,Ultra-Low-ESR, Conformal-Coated Tantalum Chip Capacitor

文件：449.63 Kbytes Page：2 Pages

Solid Tantalum Chip Capacitors TANTAMOUNT® , Ultra-Low ESR, Conformal Coated, Maximum CV

文件：99.99 Kbytes Page：4 Pages

Solid Tantalum Chip Capacitors, TANTAMOUNT

文件：296.87 Kbytes Page：20 Pages