Summary

The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the

highest performance. The -1L devices can operate at either of two VCCINT voltages, 0.95V and 0.90V and

are screened for lower maximum static power. When operated at VCCINT = 0.95V, the speed specification

of a -1L device is the same as the -1 speed grade. When operated at VCCINT = 0.90V, the -1L performance

and static and dynamic power is reduced.

DC and AC characteristics are specified in commercial, extended, industrial, and military temperature

ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical

parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed

grade industrial device are the same as for a -1 speed grade commercial device). However, only selected

speed grades and/or devices are available in each temperature range.

All supply voltage and junction temperature specifications are representative of worst-case conditions.

The parameters included are common to popular designs and typical applications.

This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is

available on the Xilinx website at www.xilinx.com/documentation.