Features

ESD Protect for 4 high-speed I/O lines and one

VDD line

Provide ESD protection for each line to

IEC 61000-4-2,(ESD) ±27kV (air), ±16kV (contact)

IEC 61000-4-4 (EFT) Level-3, 55A (5/50ns)

IEC 61000-4-5 (Lightning) 6A (8/20μs)

For low operating voltage applications: 5V, 4.2V,

3.3V, 2.5V etc.

Low capacitance : 1.0pF typical

Fast turn-on and Low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS diode

Solid-state silicon-avalanche and active circuit

triggering technology

Back-drive protection for power-down mode

Lead-free version available

Green part

Applications

Video Graphics Cards

Digital Visual Interface (DVI)

USB2.0 Power and Data lines protection

Notebook and PC Computers

Monitors and Flat Panel Displays

Description

AZC199-04S is a design which includes ESD

rated diode arrays to protect high speed data

interfaces. The AZC199-04S has been specifically

designed to protect sensitive components which

are connected to data and transmission lines from

over-voltage caused by Electrostatic Discharging

(ESD).

AZC199-04S is a unique design which includes

ESD rated, low capacitance steering diodes and a

unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct the

transient to either the power supply line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the power

line, protecting any downstream components.

Besides, there is a back-drive protection design in

AZC199-04S for power-down mode operation.

AZC199-04S may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).

One AZC199-04S can be used to replace 4

BAV99 devices in a 5V application or a lower

than 5V application.