Features

 ESD protect for one line with bi-directional

 Provide transient protection for the protected

line to

IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact)

IEC 61000-4-5 (Lightning) 5A (8/20s)

 Ultra-low capacitance: 0.4pF typical

 0402 small DFN package saves board space

 Protect one I/O line or one power line

 Fast turn-on and low clamping voltage

 Suitable for, 8V and below, operating voltage

applications

 Solid-state silicon-avalanche and active circuit

triggering technology

 Green part

 AEC-Q101 qualified

Applications

 Automotive applications

 Antenna applications

 USB3.0 / USB2.0

 High Definition Multi-media Interface (HDMI)

 Hand held portable applications

 High speed data interfaces

Description

AZ9568-01F is a design which includes a

bi-directional ESD rated clamping cell to protect

high speed data interfaces in an electronic

systems. The AZ9568-01F has been specifically

designed to protect sensitive components which

are connected to data and transmission lines

from over-voltage caused by Electrostatic

Discharging (ESD) and Lightning.

AZ9568-01F is a unique design which includes

proprietary clamping cells with ultra-low

capacitance in a small package. During transient

conditions, the proprietary clamping cells prevent

over-voltage on the control/data lines, protecting

any downstream components.

AZ9568-01F is bi-directional and may be used on

lines where the signal swings above and below

ground.

AZ9568-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(15kV air, 8kV contact discharge).