2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State

DESCRIPTION The 74ALVT162244 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. FEATURES • 16-bit bus interface • 3-State buffers • 5V I/O compatibile • Output capability: +12mA/-12mA • TTL input and output switching levels

2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State

HIGH ENVIRONMENTAL RESISTANCE

FEATURES • Subminiature size (19.8×11.1×6.4 mm) (.780×.437×.252 inch) • Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap keeps off the cause of miscontact such as dust. Conforming to IP67* of IEC protective construction classification • Elas

16-bit buffer/line driver with 30ohm termination resistor 3-State

DESCRIPTION The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit b

16-bit buffer/line driver with 30ohm termination resistor 3-State

DESCRIPTION The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit b

16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

文件：269.17 Kbytes Page：15 Pages