8-bit Microcontroller with 4/8/16/32K Bytes In-System Programmable Flash

Overview The ATmega48A/PA/88A/PA/168A/PA/328/P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48A/PA/88A/PA/168A/PA/328/P achieves throughputs approaching 1 MIPS per MHz allowing the sy

High Performance, Low Power AVR® 8-Bit Microcontroller Family

Features  High Performance, Low Power AVR® 8-Bit Microcontroller Family  Advanced RISC Architecture ̶ 131 Powerful Instructions – Most Single Clock Cycle Execution ̶ 32 x 8 General Purpose Working Registers ̶ Fully Static Operation ̶ Up to 20 MIPS Throughput at 20MHz ̶ On-chip 2-cycle Mul

ATMEL 8-BIT MICROCONTROLLER WITH 4/8/16/32KBYTES IN-SYSTEM PROGRAMMABLE FLASH

Features  High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family  Advanced RISC Architecture ̶ 131 Powerful Instructions – Most Single Clock Cycle Execution ̶ 32 x 8 General Purpose Working Registers ̶ Fully Static Operation ̶ Up to 20 MIPS Throughput at 20MHz ̶ On-chip 2-c

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

1 AMPERE SCHOTTKY BARRIER RECTIFIERS(VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere)

VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● 1 ampere operation at TA=75 ¢J with no thermal runaway ● Exceeds environmental standards of MIL-S-1