高精度恒流/恒压原边反馈控制器

ATC9612典型应用于5V2.4A（6级能效）\n ATC9612是一款高性能恒流、恒压的原边反馈控制器，适用于各种低功耗AC/DC充电器和适配器应用场合。该控制器采用原边反馈控制机制，无需光TL431即可以实现高精度的电压输出。\n 在恒流控制模式中，可以通过改变与CS管脚连接的Rcs电阻阻值来调节输出电流大小。在恒压控制模式下，ATC9612使用了多种工作模式以得到高转换效率和小的音频异响。ATC9612内置输出线损补偿，并可以通过修改反馈电阻阻值调整补偿比例，以达到适应各种不同输出导线线损要求，可以有效的补偿输出电流在输出线上引起的线损压降。在恒流模式和重负载下ATC961  ≤75mW 待机功耗，满足六级能效要求\n 准谐振工作机制，提高系统效率\n\n 恒压、恒流精度高\n 输出线损补偿可调\n 内置输入线电压补偿\n 输出开路、短路保护\n VCC 电压钳位\n 过温保护;

Low-Dropout, 500mA Linear Regulator with Reset

General Description The G9612 are low-dropout, linear regulator with reset function supply 3.4V, 3.3V or 2.5V output for currents up to 500mA. They are available in a 1.0W SOT 89-5L package with 0.18 inch2 copper heat sink. Typical dropouts are 560mV at 5V and 500mA. Other features include foldba

Low-Dropout, 500mA Linear Regulator with Reset

General Description The G9612 are low-dropout, linear regulator with reset function supply 3.4V, 3.3V or 2.5V output for currents up to 500mA. They are available in a 1.0W SOT 89-5L package with 0.18 inch2 copper heat sink. Typical dropouts are 560mV at 5V and 500mA. Other features include foldba

Low-Dropout, 500mA Linear Regulator with Reset

General Description The G9612 are low-dropout, linear regulator with reset function supply 3.4V, 3.3V or 2.5V output for currents up to 500mA. They are available in a 1.0W SOT 89-5L package with 0.18 inch2 copper heat sink. Typical dropouts are 560mV at 5V and 500mA. Other features include foldba

Low-Dropout, 500mA Linear Regulator with Reset

General Description The G9612 are low-dropout, linear regulator with reset function supply 3.4V, 3.3V or 2.5V output for currents up to 500mA. They are available in a 1.0W SOT 89-5L package with 0.18 inch2 copper heat sink. Typical dropouts are 560mV at 5V and 500mA. Other features include foldba

Low-Dropout, 500mA Linear Regulator with Reset

General Description The G9612 are low-dropout, linear regulator with reset function supply 3.4V, 3.3V or 2.5V output for currents up to 500mA. They are available in a 1.0W SOT 89-5L package with 0.18 inch2 copper heat sink. Typical dropouts are 560mV at 5V and 500mA. Other features include foldba