High-speed CAN FD Transceiver with Silent Mode and VIO Pin

The Microchip ATA6564 is a high-speed CAN FD transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differe Fully ISO 11898-2, ISO 11898-2: 2016 and SAE J2962-2 compliant\nISO 26262 FuSa Ready\nCAN FD - communication speed up to 5Mbit/s\nLow electromagnetic emission (EME) and high electromagnetic immunity (EMI)\nDifferential receiver with wide common mode range\nDirect interfacing to microcontrollers wit;

High-Speed CAN Transceiver with Silent Mode - CAN FD Ready

文件：1.23956 Mbytes Page：28 Pages

High-Speed CAN Transceiver with Silent Mode - CAN FD Ready

文件：1.23956 Mbytes Page：28 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：AUTOMOTIVE CAN TRX 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC TRANSCEIVER HALF 1/1 8SOIC 集成电路（IC） 驱动器，接收器，收发器

High-Speed CAN Transceiver with Silent Mode - CAN FD Ready

文件：1.23956 Mbytes Page：28 Pages

High-Speed CAN Transceiver with Silent Mode - CAN FD Ready

文件：1.23956 Mbytes Page：28 Pages

High-Speed CAN Transceiver with Silent Mode - CAN FD Ready

文件：1.23956 Mbytes Page：28 Pages

Quadruple Operational Amplifiers

The AN1324 (AN6564)and the AN1324NS (AN6564NS)are quadruple operational amplifiers with phase compensation circuits built-in, and with wide range of operating voltages, allowing single power supply operation. They have electrical characteristics equal to the conventional operational amplifiers,

Quadruple Operational Amplifiers

The AN1324 (AN6564)and the AN1324NS (AN6564NS)are quadruple operational amplifiers with phase compensation circuits built-in, and with wide range of operating voltages, allowing single power supply operation. They have electrical characteristics equal to the conventional operational amplifiers,

Multi-Phase PWM Controller with Linear 6-bit DAC Capable of Precision rDS(ON) or DCR Differential Current Sensing

The ISL6564 is a Multi-phase PWM controller which controls microprocessor core voltage regulation by driving up to 4 synchronous-rectified buck channels. It features a high bandwidth control loop to provide optimal response to the load transients. With switching frequency up to 1.5MHz per phase, t

Multi-Phase PWM Controller with Linear 6-bit DAC Capable of Precision rDS(ON) or DCR Differential Current Sensing

The ISL6564 is a Multi-phase PWM controller which controls microprocessor core voltage regulation by driving up to 4 synchronous-rectified buck channels. It features a high bandwidth control loop to provide optimal response to the load transients. With switching frequency up to 1.5MHz per phase, t

4CH Bridge (BTL) Driver for CD-R

4CH Bridge (BTL) Driver for CD-R