Accessories Hardware

[NKK Switches] Hardware Threading Many hardware pieces are available in both metric and inch threading, and in such cases M (metric) and H (inch) are noted in the descriptions. The customer must select threading by placing an M or H after the basic AT part number. If the hardware is available

Accessories Hardware

文件：3.62022 Mbytes Page：33 Pages

USB HUB CONTROLLER

Description The AT43301 is a 5-port USB hub chip supporting one upstream and four down stream ports. The AT43301 connects to an upstream hub or host/root hub via Port0, while the other ports connect to external downstream USB devices. The hub re-trans mits the USB differential signal between Po

USB Hub

Description The AT43310 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43310 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features • Bus Powered Hub Controller

USB Hub

Description The AT43311 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43311 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features • Self-Powered Hub with Bus P

Self- and Bus- Powered USB Hub Controller

Description The AT43312 is a 5 port USB hub chip supporting one upstream and four downstream ports. The AT43312 connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0 and

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

Full-speed USB Hub/Function Microcontroller

Overview The Atmel AT43320 is a microcontroller-based USB hub with an embedded function. The USB hub has five downstream ports, one of which is permanently attached. Internally the AT43320 consists of a USB hub and function interface, a hub repeater, and a high-performance, efficient 8-bit RISC m

lSM External Antennas

2. Product Features 2.1 The antenna is made of carbon steel 2.2 Plastic anti-aging ABS,with long service life 2.3 SMA connectors have a long service life and are not easily oxidized 2.4 Wide bandwidth, low VSWR, good matching 2.5 Beautiful appearance of small and compact, easy installation, s

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

封装/外壳：32-LQFP 功能：集线器控制器 包装：管件 描述：IC USB HUB CTRLR 4PORT 32LQFP 集成电路（IC） 控制器

封装/外壳：24-SOIC（0.295"，7.50mm 宽） 功能：集线器控制器 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC USB HUB CTRLR 4PORT 24SOIC 集成电路（IC） 控制器

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

Low-cost USB Hub Controller

文件：319.39 Kbytes Page：27 Pages

USB Hub

USB Hub

Self- and Bus- Powered USB Hub Controller

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

Self- and Bus-Bus-powered USB Hub Controller

文件：325.35 Kbytes Page：28 Pages

ISM External Antennas

文件：511.27 Kbytes Page：4 Pages

ISM External Antennas

文件：223.9 Kbytes Page：3 Pages

ISM External Antennas

文件：239.92 Kbytes Page：3 Pages

LC2MOS Precision Quad SPST Switches

GENERAL DESCRIPTION The ADG431, ADG432 and ADG433 are monolithic CMOS devices comprising four independently selectable switches. They are designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance. The on resistance profile is

PNP SILICON EPIBASE TRANSISTORS

PNP Silicon Epibase Transistors

COMPLEMENTARY SILICON POWER TRANSISTORS

DESCRIPTION The BD433, BD435, and BD437 are silicon epitaxial-base NPN power transistors in Jedec SOT-32 plastic package, intented for use in medium power linear and switching applications. The BD433 is especially suitable for use in car-radio output stages. The complementary PNP types are BD43

N-CHANNEL POWER MOSFETS

FEATURES • Low RDs(on) at high voltage • Improved inductive ruggedness • Excellent high voltage stability • Fast switching times • Rugged polysilicon gate cell structure • Low input capactiance • Extended safe operating area • Improved high temperature reliablitiy • TO-3 package (High vol

1.0 mm X 4.0 mm Series

文件：32.03 Kbytes Page：1 Pages