10G Active Mux (1x2) with Integrated Re-timer for USB 3.1

Features
Built-in re-timer - Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps - Loss compensation to recover up to 23dB channel loss
Integrated mux - Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector - Mux control input through I2C comma

USB Power Delivery PHY with Channel Configuration Control

Features
On-chip Microcontroller (OCM) to implement USBPD messaging and DisplayPort related functions
DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode to support exter

USB Power Delivery PHY with Channel Configuration Control

Features
On-chip Microcontroller (OCM) to implement cable detection and USB-PD messaging for charging related functions
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode to support external MCU/IC
VBUS control and USB_ID pins to control external switch, Powe

USB Type-C™ Crosspoint Switch

Features
High-speed switching up to 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and related functions
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode

USB Type-C™ Crosspoint Switch

Features
High-speed switching up to 6.75Gbps
4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM mes

10G USB 3.1 Re-timer (1-Port)

Features
Built-in re-timer - Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps - Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Reference clock for re-timer - Utilizes a 24MHz reference XTAL or 1.05V

8.1G DisplayPort™ 4-lanes Re-timer

Features  Built-in re-timers - Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps - Supports both transparent mode and nontransparent mode (transparent or LTTPR) - Loss compensation to recover up to 27dB channel loss  Integrated AUX pass-through

DIGITALLY CONTROLLED AUDIO PROCESSOR WITH SURROUND SOUND MATRIX AND VOICE CANCELLER

DESCRIPTION The TDA7430/TDA7431 is volume tone (bass middle and treble) balance (Left/Right) processors voice canceller for quality audio applications in car radio and Hi-Fi systems. They reproduce surround sound by using programmable phase shifters and a signal matrix. Control of all the funct

Negative Voltage Regulator

General Description The HT74XX series is a set of three-terminal high current high voltage regulator implemented in CMOS technology. They can deliver 100mA output current and allow an input voltage as high as -24V. They are available with several fixed output voltages ranging from -2.4V to -15V

Strain Relief Mounting Hole Punches

文件：130.259 Kbytes Page：1 Pages

30V, 1.5MHz, 700mA Step-Down Converter

文件：189.79 Kbytes Page：3 Pages

N-Channel 30-V (D-S) MOSFET

文件：367.3 Kbytes Page：5 Pages