THREE-CHANNEL PWM CONTROLLER

Features • Qualified to AEC-Q100 Grade 1 • Gate Drive Current 50mA per channel • Three-Channel Pulse Width Modulation (PWM) Dimming • Independent Diagnostic and Protection per Channel • Drive External Power MOSFET or BJT • External Resistors Define Peak Current • Open/Short LED String Diagn

丝印代码：T14；THREE-CHANNEL PWM CONTROLLER

Features • Qualified to AEC-Q100 Grade 1 • Gate Drive Current 50mA per channel • Three-Channel Pulse Width Modulation (PWM) Dimming • Independent Diagnostic and Protection per Channel • Drive External Power MOSFET or BJT • External Resistors Define Peak Current • Open/Short LED String Diagn

Automotive-Compliant* Three-Channel PWM Controller with Fault Diagnostics for Automotive Exterior Lighting

文件：254.94 Kbytes Page：2 Pages

Automotive-Compliant* Three-Channel PWM Controller with Fault Diagnostics for Automotive Exterior Lighting

文件：254.94 Kbytes Page：2 Pages

Automotive-Compliant* Three-Channel PWM Controller with Fault Diagnostics for Automotive Exterior Lighting

文件：254.94 Kbytes Page：2 Pages

CATV amplifier module

DESCRIPTION Hybrid amplifier module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). FEATURES • Excellent linearity • Extremely low noise • Silicon nitride passivation • Rugged construction • Optimal reliability ensured by TiPtAu metallize

128 Channel Serial to Parallel Converter with Push-Pull Outputs

General Description The Supertex HV583 is a 128-channel low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a display driver. It can also be used in any application requiring multiple output, high voltage current sourcing and si

128 Channel Serial to Parallel Converter with Push-Pull Outputs

General Description The Supertex HV583 is a 128-channel low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a display driver. It can also be used in any application requiring multiple output, high voltage current sourcing and si

Silicon Rectifier Diode Schottky, RF Switch

Description: The NTE583 is a metal to silicon junction diode featuring high breakdown, low turn–on voltage and ultrafast switching. This device is primarly intented for high level UHF/VHF detection and pulse application with broad dynamic range.

Two Channel Direct Drive Speech Controller?

INTRODUCTION SNC583 is a two-channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programming through the tiny controller in SNC583, user’s varied applications including voice section combination, key