头戴式耳机支架

\n\nAH202专门为头戴式耳机音频测试所设计，左右耳面间距为13cm~17cm可调，并提供刻度供参考，极高的测试重复精度。\n\n\n\n其结构设计稳定牢固，操作重复度高，为头戴式耳机声学测试提供稳定夹具基础。\n\n\n\n实际购买AH202的单品，并不包括人工耳MPA 318，人工嘴AM 580。 所有安装调整位置带刻度，重复度高\n\n手工调节螺丝，调节过程无需工具参与\n\n头高，左右耳宽可调节\n\n支持MPA 318传感器快速接入\n\n支持人工嘴安装\n\n耳机轮廓环可根据不同耳机尺寸进行更换;

1W High Linearity Amplifier

文件：422.36 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

0.05uH, 15%, 0.47mOhm, 70Amp Max. SMD Power bead

Inductance range: 50.0nH to 80.0nH. High current of up to 74.0A (20% Roll off). 5.20 x 5.00mm foot print with 6.00mm max height. • Ferrite based SMD inductor with low core loss.\n• High current output chokes of up to 74.0 Amp with approx. 20% roll off.\n• 5.20 x 5.00mm foot print.\n• Operating frequency of up to 5.0MHz.\n• RoHS & HF compliant., T & R Qty’s: 800pcs, 13'' Reel.\n;

High Dynamic Range Amplifier

Product Description\nThe  AH202  is  a  1-Watt  driver  amplifier  that  offers excellent  dynamic  range  in  a  low-cost,  lead-free/RoHS compliant  6x6  mm  28-pin  QFN  surface-mount  package. This  device  provides  its  optimum  P1dB  and  OIP3 performance  when biased  at  +  11  V;  It  can  •  50 – 2200 MHz\n•  +30 dBm P1dB\n•  +47 dBm Output IP3\n•  17 dB Gain @ 900 MHz\n•  MTTF 100 Years\n•  Single Positive Supply\n•  Internally Matched\n•  Lead-free/RoHS-compliant 6x6mm QFN SMT package;

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：390.45 Kbytes Page：7 Pages

1W High Linearity Amplifier

文件：390.45 Kbytes Page：7 Pages

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：422.36 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：422.36 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：390.45 Kbytes Page：7 Pages

1W High Linearity Amplifier

文件：390.45 Kbytes Page：7 Pages

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：422.36 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：332.23 Kbytes Page：9 Pages

1W High Linearity Amplifier

文件：390.45 Kbytes Page：7 Pages

1W High Linearity Amplifier

文件：422.36 Kbytes Page：9 Pages

SUPERFAST RECOVERY RECTIFIERS(VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Amperes)

FEATURES ● Superfast recovery times-epitaxial construction ● Low forward voltage, high current capability ● Exceeds environmental standards of MIL-S-19500/228 ● Hermetically sealed ● Low leakage ● High surge capability ● Plastic package has Underwriters Laboratories Flammability Classificat

IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating : 60 Amperes peak

FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES High current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound 2.0 ampere operation at TA =55 ¢J with no thermal runaway

SCHOTTKY BARRIER RECTIFIERS(2.0A,20-60V)

Using the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overly contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • In