SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

INTRODUCTION This document specifies the outside dimensions, optical characteristics, electrical characteristics, interface, controller commands, etc. of the LCD module. FEATURES (1) Compact intregal COG display module (2) Low power consumption. (3) 128x164 dots FSTN LCD module. (4) Positive

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

MECHANICAL SPECS 1. Overall Module Size 78.0mm(W) x 70.0mm(H) x max 13.0mm(D) for LED backlight version 2. Dot Size 0.39mm(W) x 0.55mm(H) 3. Dot Pitch 0.44mm(W) x 0.60mm(H) 4. Duty 1/64 5. Controller IC S6B0108 or EQUI 6. LC Fluid Options STN 7. Polarizer Options Reflective,transflective,Tr

STANDARD CHIP-ON-GLASS DISPLAYS

FEATURES In a COG display, a bare IC called “gold bump” or “flip chip” is connected to transparent traces on the LCD glass (no PCB needed). COMPACT: very space economical, modules can be as thin as 2 mm INEXPENSIVE: cost effective over COB & SMT modules, especially for graphic LCD’s, bec

LCD MODULE

0.3-7.0V; 1.8mA; number of dots 128 x 64dots; dot size0.48 x 0.48mm; dot pitch0.52 x 0.52mm; AZ display

LCD MODULE

0.3-7.0V; 1.0mA; number of dots 128 x 64dots; dot size0.39 x 0.55mm; dot pitch0.44 x 0.60mm; AZ display

Continuous Hinge with Clamps, Type 4

APPLICATION A continuous hinge combined with stainless steel clamps on three sides provide environmental protection and security in indoor or outdoor applications.

Power Common Mode Chokes

Features • Commercial Grade • PPAP ready and supported • Excellent impedance characteristics • Rated current up to 10A • Extremely Low DCR Applications • DC power line common mode noise suppression. • Switch Mode Power Supplies and regulators • Variable Frequency Drives • AC/DC power r

10 TO 1200 MHz TO-8 CASCADABLE AMPLIFIER

文件：160.48 Kbytes Page：2 Pages