25 MBaud MOST 光纤接收器

AFBR-2013 接收器专为接收高达 25Mb/s 双相编码（高达 50Mbaud）光学数据而设计。采用 4-pin 清透模压低成本封装，适合 MOST® 塑料光纤连接器。\n输出数据采用 TTL 电平设计，兼容 MOST® 网络接口控制器芯片。\n这些光学器件特别面向 -40°C 到 +95°C 工作温度范围设计，并且符合汽车应用的高可靠性需求。\n并且可以采用回流焊工艺对 AFBR-2013 设备进行处理。\n没有数据传输时，接收器可以转换到低功耗模式。在这个模式下，PIN 二极管会检测数据活动并自动转换回到正常工作模式。 ·可采用回流工艺配件进行焊加工 JEDEC 标准 J-STD-020D\n·在 3.3V 或 5V (+/-5% each) 电源电压下进行运作\n·-40°C 到 +95°C 工作温度范围\n·TTL 数据输出（逻辑到光功能）\n·省电模式\n·在低功率模式下，接收器 STATUS-pin 会显示是否已接收调制光（点亮 -> STATUS = 低）。使用此 Status-pin 可打开整个 MOST 设备的电源。\n·占空比调节 (DCA)，取决于 SP1 输入电压摆幅的增强\n·650nm 时保证灵敏度达 -25dBm\n·完全符合“MOST® 物理层规格 1.1 版”\n·符合 ;

Fiber Optic Transmitter and Receiver for 50 MBaud MOST

文件：110.18 Kbytes Page：9 Pages

Fiber Optic Transmitter and Receiver for 50 MBaud MOST

文件：110.18 Kbytes Page：9 Pages

Fiber Optic Transmitter and Receiver for 50 MBaud MOST

文件：110.18 Kbytes Page：9 Pages

GSM 4 W power amplifier

GENERAL DESCRIPTION The CGY2013G is a GSM class 4 GaAs Monolithic Microwave Integrated Circuit (MMIC) power amplifier specifically designed to operate at 3.6 V battery supply. The PA requires only a 30 dB harmonic low-pass filter to comply with the GSM transmit spurious specification. It can be

PATENTED GOLD METALIZED SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR?

General Description Silicon VDMOS and LDMOS transistors designed specifically for broadband RF applications. Suitable for Military Radios, Cellular and Paging Amplifier Base Stations, Broadcast FM/AM, MRI, Laser Driver and others. Polyfet process features gold metal for greatly extended lifetime

Integrated Circuit 7-Channel Darlington Array/Driver

Description: The NTE2011 through NTE2015 are high–voltage, high–current Darlington arrays in a 16–Lead DIP type package and are comprised of seven silicon NPN Darlington pairs on a common monolithic sub strate. All units have open–collector outputs and integral diodes for inductive load transie

Adaptive allocation and scaling for PASC coding in DCC systems

GENERAL DESCRIPTION The SAA2013 performs the adaptive allocation and scaling function in the Precision Adaptive Sub-band Coding (PASC) system. It is not required in playback only applications, and is only used during recording. To complete the PASC processor, a SAA2003 stereo filter and codec is

Adaptive allocation and scaling for PASC coding in DCC systems

GENERAL DESCRIPTION The SAA2013 performs the adaptive allocation and scaling function in the Precision Adaptive Sub-band Coding (PASC) system. It is not required in playback only applications, and is only used during recording. To complete the PASC processor, a SAA2003 stereo filter and codec is