丝印代码：ADS105A160S；SCRs

General Description The105A SCR series of silicon controlled rectifiers,with high ability to withstand the shock loading of large current,provide high dv/dt rate with strong resistance to electromagnetic interference.They are especially recommended for use on solid state relay,motorcycle, pow

RECTIFIER DIODES MODULE

RECTIFIER DIODES MODULE Repetitive voltage up to 1000 V Mean forward current 957 A Surge current 23 kA

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

丝印代码：BD0；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BD0；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BD0；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

丝印代码：BD0；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

丝印代码：BD0；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BSKQ；ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

丝印代码：BSKQ；ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

丝印代码：BD1；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BD1；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BD1；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

丝印代码：BD1；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

丝印代码：BD1；LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

LOW POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C??INTERFACE

DESCRIPTION The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a sin

丝印代码：BTMQ；ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

丝印代码：BTMQ；ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

ADS1000-Q1 Automotive, Low-Power, 1-Channel, 128-SPS, 12-Bit, Delta-Sigma ADC With I2C Interface

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Complete 12-bit data acquisition system in a tiny SOT-23 package • Low current consumption: Only 90 μA • Integral nonlinearity: 1 LSB max • Single-cycle conversion • Programmable gain

LOW-POWER, 12-Bit ANALOG-TO-DIGITAL CONVERTER with I2C™ INTERFACE

1FEATURES 23· Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package · Low Current Consumption: Only 90μA · Integral Nonlinearity: 1LSB Max · Single-Cycle Conversion · Programmable Gain Amplifier Gain = 1, 2, 4, or 8 · 128SPS Data Rate · I2C Interface with Two Available Addresse

具有 PGA、振荡器和 I2C 的汽车类、12 位、128SPS、单通道 Δ-Σ ADC

The ADS1000-Q1 is an I2C-compatible serial interface analog-to-digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000-Q1 operates from a single power • Qualified for Automotive Applications\n• Low Current Consumption: Only 90 µA\n• Single-Cycle Conversion\n• 128-SPS Data Rate\n• Power Supply: 2.7 V to 5.5 V \n• Automotive Head Units\n• Automotive On-Board Chargers\n• NOx Sensors\n• Oxygen (O2, Lambda, A/F) Sensors\n• Other Emissions and Gas Senso;

RECTIFIER DIODES MODULE

RECTIFIER DIODES MODULE Repetitive voltage up to 1000 V Mean forward current 957 A Surge current 23 kA

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS1018 Ultrasmall, Low-Power, SPI™-Compatible, 12-Bit, Analog-to-Digital Converter With Internal Reference and Temperature Sensor

1 Features 1• Ultrasmall X2QFN Package 2 mm × 1.5 mm × 0.4 mm • 12-Bit Noise-Free Resolution • Wide Supply Range: 2 V to 5.5 V • Low Current Consumption: – Continuous Mode: Only 150 μA – Single-Shot Mode: Automatic Power-Down • Programmable Data Rate: 128 SPS to 3300 SPS • Single-Cycle Se

ADS1118 Ultrasmall, Low-Power, SPI™-Compatible, 16-Bit Analog-to-Digital Converter with Internal Reference and Temperature Sensor

1 Features 1• Ultrasmall X2QFN Package: 2 mm × 1.5 mm × 0.4 mm • Wide Supply Range: 2 V to 5.5 V • Low Current Consumption: – Continuous Mode: Only 150 μA – Single-Shot Mode: Automatic Power Down • Programmable Data Rate: 8 SPS to 860 SPS • Single-Cycle Settling • Internal Low-Drift Volt

具有振荡器、电压基准和 I2C 的 12 位 3.3kSPS 单通道 Δ-Σ ADC

ADS1013、ADS1014 和 ADS1015 器件 (ADS101x) 是兼容 I2C 的 12 位高精度低功耗模数转换器 (ADC)，采用超小型无引线 X2QFN-10 封装和 VSSOP-10 封装。ADS101x 器件采用了低漂移电压基准和振荡器。ADS1014 和 ADS1015 还采用可编程增益放大器 (PGA) 和数字比较器。这些 特性以及较宽的工作电源电压范围使得 ADS101x 非常合适功率受限和空间受限的传感器测量 应用。 \n\nADS101x 可在数据速率高达每秒 3300 个样本 (SPS) 的情况下执行转换。PGA 可提供从 ±256mV 到 ±6.144V 的 • 超小型 X2QFN 封装： 2mm × 1.5mm × 0.4mm\n• 12 位无噪声分辨率\n• 宽电源电压：2.0V 至 5.5V\n• 低流耗：150µA（连续转换模式）\n• 可编程数据速率：128SPS 至 3.3kSPS\n• 单周期稳定\n• 内部低漂移电压基准\n• 内部振荡器 \n• I2C 接口：四个可通过引脚选择的地址\n• 四个单端输入或两个差分输入 (ADS1015)\n• 可编程比较器（ADS1014 和 ADS1015）\n• 工作温度范围：-40°C 至 +125°C;

ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

丝印代码：19O6；ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

丝印代码：19O6；ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

丝印代码：BRMI；ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS101x Ultra-Small, Low-Power, I2C-Compatible, 3.3kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • Ultra-small packages: – X2QFN: 1.5mm × 2mm × 0.4mm – SOT: 2.9mm × 2.8mm × 0.6mm • Noise-free resolution: 12 bits • Wide supply range: 2.0V to 5.5V • Low current consumption: 150μA (continuous-conversion mode) • Programmable data rate: 128SPS to 3.3kSPS • Single-cycle settlin

ADS111x-Q1 Automotive, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Wide supply range: 2.0 V to 5.5 V • Low current consumption: – 150 μA (continuous-conversio

ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption

ADS111x-Q1 Automotive, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Wide supply range: 2.0 V to 5.5 V • Low current consumption: – 150 μA (continuous-conversio

ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Noise-free resolution: 12 bit • Wide supply range: 2.0 V to 5.5 V • Low current consumption