High Linearity, Silicon SP4T Switch, 1.8 GHz to 3.8 GHz

GENERAL DESCRIPTION The ADRF5347 is a high linearity, reflective, single-pole, four-throw (SP4T) switch manufactured in the silicon process. The ADRF5347 operates from 1.8 GHz to 3.8 GHz with a typical insertion loss lower than 0.42 dB and a typical input IP3 of 84 dBm. The device has an RF i

High Linearity, Silicon SP4T Switch, 1.8 GHz to 3.8 GHz

GENERAL DESCRIPTION The ADRF5347 is a high linearity, reflective, single-pole, four-throw (SP4T) switch manufactured in the silicon process. The ADRF5347 operates from 1.8 GHz to 3.8 GHz with a typical insertion loss lower than 0.42 dB and a typical input IP3 of 84 dBm. The device has an RF i

High Linearity, Silicon SP4T Switch, 1.8 GHz to 3.8 GHz

GENERAL DESCRIPTION The ADRF5347 is a high linearity, reflective, single-pole, four-throw (SP4T) switch manufactured in the silicon process. The ADRF5347 operates from 1.8 GHz to 3.8 GHz with a typical insertion loss lower than 0.42 dB and a typical input IP3 of 84 dBm. The device has an RF i

SMOKE DETECTOR WITH INTERCONNECT AND TIMER

The A5347CA is a low-current, CMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incor

SMOKE DETECTOR WITH INTERCONNECT AND TIMER

The A5347CA is a low-current, CMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incor

2.5 V to 5.5 V, Parallel Interface 2.5 V to 5.5 V, Parallel Interface

CGENERAL DESCRIPTION The AD5346/AD5347/AD53481 are octal 8-,10-,and 12-bit DACs,operating froma 2.5 V to 5.5 V supply. These devices incorporatean on-chipoutput buffer that can drive the output to both supply rails, and also allow a choice of buffered or unbuffered reference input. FEATURE

2.5 V to 5.5 V, Parallel Interface 2.5 V to 5.5 V, Parallel Interface

CGENERAL DESCRIPTION The AD5346/AD5347/AD53481 are octal 8-,10-,and 12-bit DACs,operating froma 2.5 V to 5.5 V supply. These devices incorporatean on-chipoutput buffer that can drive the output to both supply rails, and also allow a choice of buffered or unbuffered reference input. FEATURE

2.5 V to 5.5 V, Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs

文件：476.13 Kbytes Page：24 Pages