Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

封装/外壳：10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 包装：卷带（TR） 描述：IC TRANSCEIVER FULL 1/1 10MSOP 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC TRANSCEIVER FULL 1/1 14SOIC 集成电路（IC） 驱动器，接收器，收发器

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

Resin-Coated, Radial-Lead Solid Tantalum Capacitors

FEATURES • Terminations: standard SnPb,    100 tin available • Large capacitance range • Encapsulated in a hard orange epoxy resin • Large variety of lead styles available • Supplied on tape and reel or ammopack • Low impedance and ESR at high frequencies • Material categorization: for d

PECL Output

文件：145.59 Kbytes Page：2 Pages

Resin-Coated, Radial-Lead Solid Tantalum Capacitors

文件：119.72 Kbytes Page：9 Pages

Resin-Coated, Radial-Lead Solid Tantalum Capacitors

文件：129.21 Kbytes Page：10 Pages