Quad Voltage Up and Down Sequencer and Monitor with Programmable Timing

GENERAL DESCRIPTION The ADM1186-1 and ADM1186-2 are integrated, four-channel voltage monitoring and sequencing devices. A 2.7 V to 5.5 V power supply is required on the VCC pin for power. Four precision comparators, VIN1 to VIN4, monitor four voltage rails. All four comparators share a 0.6 V ref

四通道电源时序控制器与电压监控器，具有可编程定时功能

ADM1186-1与ADM1186-2是集成的四通道电压监控器与电源时序控制器。采用2.7 V～5.5 V单电源供电。4个高精密比较器监控4个电压轨，这4个比较器共用一个0.6 V基准电压源，最坏情况精度为0.8%。连接在VIN1、VIN2、VIN3与VIN4引脚外部的电阻网络可用于为监控电源轨设置欠压跳变点。ADM1186-1与ADM1186-2具有4个开漏使能输出（OUT），用于启动电源。利用开漏电源良好输出（PWRGD）可以在VIN输入超出欠压阈值时进行指示。状态机监控ADM1186-1的UP引脚与DOWN引脚（或者监控ADM1186-2的UP/DOWN引脚）的状态，以控制电源时 • 4个开漏使能输出\n• VCC引脚采用2.7 V～5.5 V单电源电压 \n• 可以对4个输入进行编程，从而利用电阻分压器监控不同的电压电平\n• 开漏使能输出;

Quad Voltage Up and Down Sequencer and Monitor with Programmable Timing

GENERAL DESCRIPTION The ADM1186-1 and ADM1186-2 are integrated, four-channel voltage monitoring and sequencing devices. A 2.7 V to 5.5 V power supply is required on the VCC pin for power. Four precision comparators, VIN1 to VIN4, monitor four voltage rails. All four comparators share a 0.6 V ref

Quad Voltage Up and Down Sequencer and Monitor with Programmable Timing

GENERAL DESCRIPTION The ADM1186-1 and ADM1186-2 are integrated, four-channel voltage monitoring and sequencing devices. A 2.7 V to 5.5 V power supply is required on the VCC pin for power. Four precision comparators, VIN1 to VIN4, monitor four voltage rails. All four comparators share a 0.6 V ref

Quad Voltage Up and Down Sequencer and Monitor with Programmable Timing

GENERAL DESCRIPTION The ADM1186-1 and ADM1186-2 are integrated, four-channel voltage monitoring and sequencing devices. A 2.7 V to 5.5 V power supply is required on the VCC pin for power. Four precision comparators, VIN1 to VIN4, monitor four voltage rails. All four comparators share a 0.6 V ref

Quad Voltage Up and Down Sequencer and Monitor with Programmable Timing

GENERAL DESCRIPTION The ADM1186-1 and ADM1186-2 are integrated, four-channel voltage monitoring and sequencing devices. A 2.7 V to 5.5 V power supply is required on the VCC pin for power. Four precision comparators, VIN1 to VIN4, monitor four voltage rails. All four comparators share a 0.6 V ref

封装/外壳：20-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR）带 描述：IC SUPERVISOR 4 CHANNEL 20QSOP 集成电路（IC） 监控器

监控电路 QUAD VOLTAGE MONITOR & SEQUENCER

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC SUPERVISOR 4 CHANNEL 16QSOP 集成电路（IC） 监控器

电源监控芯片

CD-ROM Decoder

Description The CXD1186C is a CD-ROM decoder LSI. Features • Corresponds to CD-ROM, CD-I and CD-ROM XA formats. • Real time error correction. (Erasure correction using C2 pointer from CD player.) • Double speed playback. • Connection to standard SRAM up to 64 K bytes, as buffer memory, possi

FM Front End for Radio-Cassette Recorders, Music Centers

Features and Functions • Contains RF amplifier, MIX, OSC, AFC diode. • Operating voltage : 1.8 to 8.0V. • Improvement in cross modulation characteristic due to the use of double-balanced MIX. • Improvement in strong input characteristic. • Minimum number of external parts required. • Less sp

FM Front End for Radio-Cassette Recorders, Music Centers

Features and Functions • Contains RF amplifier, MIX, OSC, AFC diode. • Operating voltage : 1.8 to 8.0V. • Improvement in cross modulation characteristic due to the use of double-balanced MIX. • Improvement in strong input characteristic. • Minimum number of external parts required. • Less sp

PROGRAMMABLE SYNCHRONOUS DC/DC CONVERTER, DUAL LOW DROPOUT REGULATOR CONTROLLER

Description The SC1186 combines a synchronous voltage mode controller with two low-dropout linear regulators providing most of the circuitry necessary to implement three DC/DC converters for powering advanced microprocessors such as Pentium® II & III. Features ◆ Synchronous design, ena

PROGRAMMABLE SYNCHRONOUS DC/DC CONVERTER, DUAL LOW DROPOUT REGULATOR CONTROLLER

Description The SC1186 combines a synchronous voltage mode controller with two low-dropout linear regulators providing most of the circuitry necessary to implement three DC/DC converters for powering advanced microprocessors such as Pentium® II & III. Features ◆ Synchronous design, ena